Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Burbank, CA
Chimney repair in Burbank usually starts with an aging flue, not a dirty one. Most homes here were built between the 1920s and 1950s, and the original clay-tile liners or unlined brick flues have been quietly degrading for decades. When we inspect a Burbank chimney, we’re looking first for cracks, gaps, and spalling that can’t be fixed with a brush. If your chimney has never been inspected since you bought the house, call (833) 467-7685 and we’ll tell you exactly what condition it’s in.
Why Burbank Homes Are Different
Burbank’s chimney work is shaped by the city’s heavy concentration of pre-war and mid-century single-family homes. The Rancho and Verdugo-adjacent streets of 91501 and 91504 were built with original brick fireplaces, and many still have unlined or clay-tile flues. Those liners crack over time, and once they do, heat and combustion gases can reach the framing. That’s the core of the trade here: inspecting and relining aging flues before they fail, not simply sweeping.
The climate changes the job too. Burbank sits in the hot, dry San Fernando Valley. Fireplaces see light, sporadic winter use, so we rarely deal with the wet-wood creosote problems you’d find in colder climates. Instead, the dominant concerns are dry soot, creosote that bakes onto flue walls, and wind-blown debris. During Santa Ana season, leaves, palm fronds, and grit drop into uncapped flues. A “sweep” in Burbank is often really a debris-and-animal-nest removal job. Periodic winter rain combined with dry rot and aging mortar makes crowns and flashing the recurring failure points.
Modest lot sizes and stucco exteriors mean chimney access is often via the roof with limited side clearance. Caps and crown work are common because water intrusion through cracked crowns is the leading cause of internal flue damage in this climate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Burbank Services
Burbank homeowners call us most often for two things: a thorough chimney sweep before burning season, and dryer vent cleaning to reduce fire risk in older laundry rooms with long vent runs.
Chimney Sweep in Burbank
A Burbank sweep is rarely just a brush job. With the city’s mature street trees and Santa Ana winds, we’re often pulling leaves, palm fronds, and bird or rodent nesting out of flues before any brushing begins. Many original 1940s-50s flues in the flats are clay-tile or unlined, so we also check for cracked sections while we’re in there, because sweeping a damaged flue doesn’t make it safe to burn. For the full scope of what a sweep includes and what it costs in Burbank, see our Chimney Sweep in Burbank page.
Dryer Vent Cleaning in Burbank
Burbank’s older bungalows and ranch homes often route dryer vents through attics or long side-wall runs where lint packs in quickly. In the Valley’s dry heat, that lint is fuel. We clean the full vent run, verify the termination damper opens and closes, and tell you if the vent material itself should be replaced. This is a standalone fire-safety service, not a throwaway add-on. Details and local pricing are on our Dryer Vent Cleaning in Burbank page.
Chimney Repair in Burbank
Most Burbank chimney repair calls come from homes built before 1960, where original clay-tile liners have cracked after decades of heat cycling and the occasional Valley rain soaking through a failed crown. We find the same pattern across the 91505 and 91506 bungalow neighborhoods and the 91504 ranch tracts: the fireplace looks fine from the living room, but the flue is no longer sealed. If you haven’t had a camera inspection since buying your Burbank home, we’d recommend one before the next burn season, because what you can’t see is exactly where the fire risk lives. Our full repair process and options are covered on the Chimney Repair hub page.
Chimney Crown Repair
Signs you need it
Hairline cracks across the cement crown, chunks missing along the edges, or persistent water stains on the ceiling near the chimney are the three we see most in Burbank.
What it costs in Burbank
Chimney crown repair in Burbank typically runs $300 to $700 depending on whether we’re filling cracks or rebuilding the crown entirely.
How we do it
We clean and prep the existing surface, fill or rebuild the crown with a weather-resistant cement mix sloped away from the flue, and seal it so Valley rain and Santa Ana grit stay out.
Chimney Flashing Repair
Signs you need it
Rust streaks down the brick, lifted or cracked flashing at the roofline, or water entering the attic only during winter rains point to flashing that’s given up.
What it costs in Burbank
Flashing repair in Burbank usually falls between $200 and $500, depending on how much of the existing metal is salvageable.
How we do it
We cut back the old flashing, install new step and counter flashing sealed to the chimney and roofline, and test the joint so the next rainy season stays outside.
Chimney Liner Installation
Signs you need it
Cracked clay-tile sections visible during a camera inspection, loose mortar joints inside the flue, or a fireplace that smokes back into the room even with the damper open.
What it costs in Burbank
A new stainless liner in Burbank typically costs $2,500 to $5,500, and HeatShield resurfacing runs $1,800 to $3,800 when the existing flue is structurally sound enough to resurface.
How we do it
We measure the full flue run, then either install a DuraFlex stainless liner sized to the existing flue or apply HeatShield ceramic resurfacing, depending on what the inspection shows and what the homeowner wants to spend.
Chimney Cap Installation
Signs you need it
Debris, leaves, or nesting material inside the flue, rain water pooling in the firebox, or an old rusted cap that no longer covers the flue opening.
What it costs in Burbank
Cap installation in Burbank ranges from $150 to $450 for most single-flue caps, with replacement of an existing cap falling between $250 and $600 including the new cap.
How we do it
We measure the flue, set a stainless or copper cap rated for your flue size, and secure it so wind and wildlife can’t move it.
What Chimney Repair Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Flashing repair | $200 – $500 |
| Crown repair | $300 – $700 |
| Stainless liner installation | $2,500 – $5,500 |
Do I really need to reline my chimney or can it wait?
If the inspection shows cracked or missing liner sections, don’t burn until it’s addressed. Heat and gases escaping through gaps can reach framing or the living space. Many Burbank homes we reline have not been burned in years, and the liner failed long before the current owner bought the house. It only becomes urgent when you light a fire. Call (833) 467-7685 for an exact quote, and we’ll show you the camera footage before quoting anything.
What actually happens if I skip chimney repair?
A cracked liner lets combustion gases and heat into places they shouldn’t go, and a failed crown lets water into the flue, which accelerates liner destruction. The repair cost grows, and so does the fire risk. In Burbank’s dry conditions, that risk is real. We’d rather show you a small crown repair now than a full liner replacement in two years. Call (833) 467-7685 and we’ll inspect it properly.
Brands We Service in Burbank
We install and service chimney components from Copperfield, DuraFlex, Gelco, and HeatShield, and we stock common cap sizes and flashing components for Burbank’s typical flue dimensions. Most replacement parts arrive within a few days when we don’t have them on the truck. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Chimney sweep | $150 – $350 |
| Dryer vent cleaning | $100 – $250 |
| Chimney cap installation | $150 – $450 |
| Chimney cap replacement | $250 – $600 |
| Chimney crown repair | $300 – $700 |
| Chimney flashing repair | $200 – $500 |
| Chimney liner installation | $2,500 – $5,500 |
| HeatShield resurfacing | $1,800 – $3,800 |
The two things that push Burbank prices up are roof access difficulty on stucco homes with limited side clearance and flues that need more prep work than expected once we’re inside. We quote a flat price before any work begins, and that’s the price you pay absent something structural we both agree to address.
Neighborhoods We Serve in Burbank
We work across Burbank, from the Rancho and Verdugo-adjacent streets to the south and west bungalow pockets and the northern ranch tracts. Most areas are within 30 minutes of our nearest dispatch route, and we group jobs by ZIP so we’re not running trucks across the Valley longer than we need to.
- Rancho District
- Magnolia Park
- Burbank Hillside
- McNeil
- Toluca Terrace area of 91505
Service Area – Cities Near Burbank
In addition to Burbank, we regularly work in the surrounding San Fernando Valley and east Valley communities. That includes Universal City, CA, North Hollywood, CA, Glendale, CA, and Studio City, CA. If you’re unsure whether your address falls in our route, call (833) 467-7685 and we’ll confirm.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burbank
In Burbank, routine sweeps, cap replacement, crown repair, and most flashing work do not require a city permit. A full liner replacement or structural rebuild may, and we handle the permit paperwork when the job calls for it. We confirm requirements on a case-by-case basis before work starts.
We schedule Burbank inspections within a few business days in most weeks. Santa Ana season is our busiest stretch because debris and nesting material show up fast. If you bought a home in one of the 1920s-50s tracts and have never had the flue inspected, book it before you first light a fire.
We cover the entire city, including the 91501, 91502, 91504, 91505, 91506, and 91523 ZIP codes. Our techs know the roof access conditions in the older stucco neighborhoods and plan accordingly. Call (833) 467-7685 and we’ll put your address on the schedule.
If your chimney has not been looked at in years, or if you’re seeing staining, smoke, or debris you can’t explain, call (833) 467-7685. We’ll inspect it, show you what we found, and give you straight options without pushing work that can wait. Ontario Chimney has served Burbank since 2014.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- David Park"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Bethany Padgett"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Sarah Sullivan