Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Inglewood, CA
Chimney repair in Inglewood is rarely a simple brush-out. Most of the fireplaces we inspect here sit inside 1920s – 1950s bungalows and Spanish Revival homes, and the original brick or clay-tile flues were built for wood fires at lower temperatures than today’s gas logs and inserts produce. Add a decade of Santa Ana heat cycles and you get cracked crowns, spalling brick, and flashing that separates from the roofline. If you need someone who understands Inglewood’s housing stock before recommending work, call Ontario Chimney at (833) 467-7685.
Why Inglewood Homes Are Different
Inglewood has one of the densest concentrations of pre-1960 single-family homes in Los Angeles County. The bungalows and Colonial Revival houses that line streets from Morningside Park up toward Centinela were nearly all built with original masonry chimneys. Those chimneys used single-wythe brick or clay tile liners, materials that crack under decades of SoCal heat cycling. The dry Mediterranean climate means no freeze-thaw damage, but the long dry season lets creosote and soot sit undisturbed for months between burn days. When a Santa Ana wind event moves through, that dry buildup inside an already cracked flue is a serious fire risk.
We also see a lot of homes that changed hands during the post-2017 redevelopment churn around Hollywood Park and SoFi. Older properties are frequently flipped or rented quickly, and a gas-log fireplace that looks fine at the walkthrough often has never been inspected. During escrow, lenders and insurance companies suddenly want a documented chimney condition report. That’s when we get the call, and that’s when we find what the last flipper never looked for: cracked clay tile, missing caps, and crowns chewed through by years of dry heat.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Inglewood Services
These are the two jobs Inglewood homeowners call us about most often, each with its own dedicated page.
Chimney Sweep in Inglewood
A chimney sweep in Inglewood means more than running a brush up the flue. Because most homes here still have original 1930s – 1950s masonry chimneys, every sweep we do includes a visual inspection of the crown, cap, flashing, and firebox. We frequently find hairline cracks in clay tile liners that have been there for years, hidden behind the soot. The good news is that a thorough sweep removes the combustible creosote that builds up during the few burn days Inglewood gets each year. Read the full breakdown on our Chimney Sweep in Inglewood page.
Dryer Vent Cleaning in Inglewood
Most Inglewood laundry rooms are small, and dryer vents often run long distances through tight crawl spaces or up through the roof. Lint accumulates faster in these long, narrow runs, and a clogged dryer vent is a leading cause of house fires, according to NFPA data. This is a standalone fire-safety service for us, not an afterthought. If your dryer takes longer than one cycle to dry a normal load or you smell a musty odor when it runs, the vent needs cleaning. See details on our Dryer Vent Cleaning in Inglewood page.
Chimney Repair in Inglewood
Chimney repair in Inglewood starts with the housing stock. A 1940s bungalow with a gas-log fireplace often has an original clay-tile flue that was never rated for the heat output of a modern gas insert. Cracks develop, the crown erodes in the dry Santa Ana summers, and water gets into the masonry. By the time a homeowner notices stains on the ceiling or a musty smell near the fireplace, the damage is usually already done. We repair chimneys and venting systems using professional-grade materials: DuraFlex stainless steel liners where relining is needed, HeatShield ceramic resurfacing where the flue can be saved, and Famco or Copperfield caps and dampers where hardware has failed. For the full scope of what we handle, see our Chimney Repair page.
One thing we tell every Inglewood homeowner: nothing gets recommended without camera evidence. We scope the flue, show you the footage, and explain exactly what needs fixing now versus what can wait. That’s the only way to make a defensible decision about a chimney you can’t see from the outside.
Chimney Cap Installation
Signs you need it
You can see daylight from inside the fireplace, birds or rodents have gotten into the flue, or you notice water staining on the firebox floor after rain.
What it costs in Inglewood
Chimney cap installation typically runs $250 – $650 depending on the flue size and whether a custom stainless or copper cap is needed.
How we do it
We measure the flue opening, select the correct cap from Famco or Copperfield, secure it to the crown with mechanical fasteners, and seal the attachment points.
Chimney Cap Replacement
Signs you need it
Your existing cap is rusted through, the mesh is clogged or torn, or the cap has lifted off the crown and is no longer seated flush.
What it costs in Inglewood
Cap replacement in Inglewood lands between $200 – $550, with the higher end covering oversized flues and stainless or copper materials.
How we do it
We remove the old cap, inspect the crown underneath, install the new cap with the correct bolts and sealant, and verify the mesh is sized to keep embers in and animals out.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked clay tiles, missing mortar joints, or a flue that was never lined to begin with.
What it costs in Inglewood
Chimney liner installation typically runs $2,500 – $6,500 in Inglewood, depending on flue length, access, and whether we use a DuraFlex stainless system.
How we do it
We run a camera scope to measure the flue, size the correct DuraFlex liner, drop it through from the top, connect it to the appliance or fireplace, and seal the termination point at the crown.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney, rust streaks on the brick, or the flashing has pulled away from the roofline.
What it costs in Inglewood
Flashing repair in Inglewood usually falls between $350 – $1,200 depending on how much of the existing flashing can be salvaged and the roof pitch.
How we do it
We cut back the old flashing, install new step and counter flashing with proper overlap, seal the transitions with a high-temperature sealant, and verify the reglet is clean.
Chimney Crown Repair
Signs you need it
The crown has visible cracks, spalling, or missing sections, so water is getting into the masonry below and accelerating deterioration.
What it costs in Inglewood
Crown repair in Inglewood runs $450 – $1,800 depending on whether we patch with a sealant or rebuild the crown with a proper overhang and drip edge.
How we do it
We chip out the deteriorated material, build a form if needed, pour or trowel the new crown with a proper slope, and coat it with a flexible waterproofing membrane.
What Chimney Repair Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $200 – $550 |
| Chimney liner installation | $2,500 – $6,500 |
| Chimney flashing repair | $350 – $1,200 |
| Chimney crown repair | $450 – $1,800 |
Do I need a new liner or can the old one be saved?
That depends on what the camera shows. Hairline cracks can often be resurfaced with HeatShield ceramic, which restores the flue without a full tear-out. If the clay tiles are shifted or missing entirely, a DuraFlex stainless liner is the right fix. We’ll show you the footage either way.
How long does a chimney repair job take in Inglewood?
Most cap, flashing, and crown repairs are done in a single visit. A full liner installation usually takes one to two days depending on access and roof pitch. We’ll give you a written scope and a schedule before any work starts. Call (833) 467-7685 for an exact quote.
Brands We Service in Inglewood
We work with a curated set of professional-grade brands: DuraFlex for stainless relining, HeatShield for ceramic flue resurfacing, and Famco and Copperfield for caps and dampers. These are the materials certified chimney professionals specify, not hardware-store substitutes. Parts for Inglewood jobs typically ship from the Copperfield and Olympia Chimney supply network within a few days. See our brands for the full breakdown.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Chimney sweep | $180 – $340 |
| Dryer vent cleaning | $150 – $350 |
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $200 – $550 |
| Chimney liner installation | $2,500 – $6,500 |
| Chimney flashing repair | $350 – $1,200 |
| Chimney crown repair | $450 – $1,800 |
| HeatShield resurfacing | $1,500 – $4,000 |
What pushes a price toward the top of the range in Inglewood is access: steep roofs on the older Colonial Revival homes, tight side yards where scaffolding has to go up over a garage, and flues that run through interior walls instead of up the exterior. The other factor is condition. A crown that looks fine from the ground can hide two inches of spalled material once we’re up there. We give you a flat price before we start, and you approve anything additional before a tool comes out.
Neighborhoods We Serve in Inglewood
We work across all of Inglewood, from the older bungalow streets north of Manchester to the post-war tracts down toward Imperial. Some of the neighborhoods where we’re regularly on rooftops:
- Morningside Park
- Inglewood Knolls
- Downtown Inglewood
- Century Heights
- Lockhaven
Response time for a standard chimney inspection or sweep in Inglewood is usually within the week. Repairs that need parts or a liner are scheduled on the next available install date, which is typically seven to ten days out.
Service Area – Cities Near Inglewood
Ontario Chimney’s Inglewood crew also serves the surrounding South Bay and South LA communities. If you’re in one of these nearby cities, we’ll bring the same camera-scope-first approach to your chimney or dryer vent. We regularly work in Hawthorne, CA, Del Aire, CA, Lennox, CA, and Alondra Park, CA.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Inglewood
For a standard chimney sweep or camera inspection, we can usually schedule within the same week. Repair work that needs parts, like a liner or custom cap, is generally booked within seven to ten days. If you’re in escrow and need a condition report, tell us when you call and we’ll prioritize the appointment.
Most chimney sweeps, cap replacements, and flashing repairs don’t require a permit in Inglewood. A full liner installation or structural rebuild can trigger a building permit depending on the scope. We’ll tell you during the estimate whether your job needs one and handle the paperwork if it does.
We start with a camera scope of the flue from top and bottom, then check the crown, cap, flashing, firebox, and damper. You’ll see the footage yourself. Once we know what we’re looking at, you get a written report with photos and a recommendation on what needs work now versus what can wait. Call (833) 467-7685 to schedule.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Bethany Padgett"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Sarah Sullivan"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Adriana Morales