Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Studio City, CA
Chimney repair in Studio City usually starts with an older masonry chimney, a clay tile liner, and a homeowner wondering whether the crack they saw during a pre-winter inspection is actually serious. Most of the time, it is. The 1920s to 1940s Spanish Colonial and Tudor homes in the hills north of Ventura Blvd were built well, but their chimneys were not designed for 80-plus years of seismic settling, Santa Ana winds, and heavy winter burn seasons. Ontario Chimney has served Studio City since 2014, and we handle the full repair scope – from a cracked flue tile to a full relining job – without handing you a scare-sale price. Call (833) 467-7685 for a straight answer and a free estimate.
Why Studio City Homes Are Different
The chimney problems we see in Studio City do not look like the problems in the flatlands. The canyon geography matters. Homes in the Fryman Canyon area and along the hillside streets above Ventura Blvd sit exposed to wind patterns that push downdrafts into flues that were never designed for that kind of turbulence. A chimney that drafts fine in Sherman Oaks can backpuff smoke into a Studio City living room on the same January night, simply because of where the house sits on the slope.
The housing stock compounds it. Original clay tile liners in 1920s and 1940s homes crack with age, but in the hills they crack sooner because the ground settles unevenly and small seismic events put the masonry under stress. During the hot, dry summer months, fireplaces in Studio City sit dormant for six or seven months. Soot hardens. Animals find their way in. Then the first cold snap hits, the fireplace gets loaded, and a blocked or cracked flue becomes an immediate, expensive problem. Santa Ana wind events add one more wrinkle: fine ash and debris from nearby brush get driven into hillside chimney caps and flues. In the flat parts of the Valley, a chimney sweep is routine. In Studio City, it is often a corrective job before it is a maintenance one.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Studio City Services
Most Studio City homeowners call us first about one of two things: a chimney that needs sweeping before burn season, or a dryer vent that has become a fire risk. Both are services we run as proper stand-alone jobs, not add-ons.
Chimney Sweep in Studio City
A chimney sweep in Studio City is rarely a simple brush-through. The hillside homes with wood-burning fireplaces collect creosote differently than flatland homes because the draft pulls unevenly, and hot dry summers bake the deposits onto the flue walls. Our sweep includes a full inspection of the flue liner, damper, and chimney cap – and after a Santa Ana event, we often find debris that has blown directly into the cap and flue. If you have not had the chimney looked at in over a year, or you just bought a character home north of the Boulevard, start here. Full details on what we check and how we price it are on our dedicated page: Chimney Sweep in Studio City.
Dryer Vent Cleaning in Studio City
The dryer vents in Studio City homes – especially in the older hillside houses – are frequently long, offset runs that exit through roofs or side walls with several bends. Lint accumulates in those bends faster than in short straight runs, and a clogged dryer vent is a leading cause of house fires, per NFPA data. This is a core service for us, handled by the same technicians who sweep chimneys, never subcontracted. If your dryer has been taking longer to dry clothes or the outside vent flap barely opens, it is time. See Dryer Vent Cleaning in Studio City for what the job involves and how we document the before-and-after.
Chimney Repair in Studio City
Chimney repair in Studio City is usually a diagnosis job first. The older masonry chimneys in the 1920s to 1940s hillside homes and the post-war tract homes near the Boulevard were built with clay tile liners, and those liners crack from age, seismic settling, and the heating-cooling cycle of decades of fires. When a liner cracks, the chimney is no longer safely containing combustion gases – and in Studio City, where hillside wind can push exhaust back into the house, that is an immediate fix, not a deferrable one. We are a full repair shop, so the same crew that sweeps your chimney can handle the structural work from inspection through completion. That is the point of Chimney Repair as a service line: one company, one diagnosis, one fix.
Chimney Cap Installation
Signs you need it
Rainwater staining on the hearth or firebox, animal sounds in the flue, or a missing or rusted cap are all signs the chimney has been open to the elements.
What it costs in Studio City
Chimney cap installation in Studio City typically runs $350 to $525 depending on the flue size and cap material.
How we do it
We measure the flue opening, install a stainless steel cap sized for the specific flue, and secure it to the crown so it does not shift in hillside wind.
Chimney Cap Replacement
Signs you need it
A cap that has lost its mesh, rusted through, or was knocked loose by a falling branch is no longer keeping animals and debris out.
What it costs in Studio City
Chimney cap replacement in Studio City typically costs $350 to $550, with the higher end covering larger or multi-flue caps.
How we do it
We remove the damaged cap, check the crown underneath for hidden damage, and fit a replacement that matches the existing flue configuration.
Chimney Liner Installation
Signs you need it
Flue tile cracks visible during a camera inspection, smoke seeping through the masonry, or a liner that has shifted out of alignment means the flue is compromised.
What it costs in Studio City
Chimney liner installation in Studio City runs $2,895 to $4,500 for a typical single-story home, depending on liner diameter and flue height.
How we do it
We remove the damaged liner where needed, size a DuraFlex stainless steel liner to the existing flue dimensions, and install it the full height of the chimney, insulated as required.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, damp masonry after rain, or lifted and corroded flashing at the roofline are the classic indicators.
What it costs in Studio City
Chimney flashing repair in Studio City typically runs $450 to $950 depending on the extent of the corrosion and the roof pitch.
How we do it
We document the existing flashing condition, strip out the failed sections, and install new flashing with proper step and counter-flashing so water sheds away from the chimney chase.
Chimney Crown Repair
Signs you need it
A crumbling, cracked, or spalling crown lets water into the masonry and accelerates damage to the chimney above the roofline.
What it costs in Studio City
Chimney crown repair in Studio City is typically $600 to $1,200 depending on the crown size and whether the existing crown can be resurfaced or needs rebuilding.
How we do it
We assess the crown for structural integrity, resurface or rebuild it with a mortar mix that sheds water properly, and confirm the flue tile remains properly sealed.
What Chimney Repair Costs in Studio City
| Item | Typical range in Studio City |
|---|---|
| Chimney cap installation | $350 – $525 |
| Chimney cap replacement | $350 – $550 |
| Chimney flashing repair | $450 – $950 |
| Chimney crown repair | $600 – $1,200 |
| Chimney liner installation | $2,895 – $4,500 |
How do I know if my chimney liner is cracked?
A camera inspection is the only way to confirm a cracked liner. Visible signs include smoke smells in the house, staining on the ceiling near the chimney, or flue tile pieces at the bottom of the firebox. Call (833) 467-7685 to schedule one.
Do I really need the repair, or can I wait?
If the liner is cracked or the cap is missing, no – those are safety issues that get worse with every fire. We will show you the camera evidence and tell you plainly if the work can wait. Call (833) 467-7685 for an honest assessment.
Brands We Service in Studio City
We work with a curated set of professional-grade brands, including DuraFlex stainless steel liners, Famco caps and dampers, and HeatShield ceramic resurfacing systems. We stock common repair parts for Studio City jobs and can source specialty components quickly through our distributor network. See our brands for the full list and why we do not use big-box substitutes.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Studio City, CA
| Service | Typical range in Studio City |
|---|---|
| Chimney sweep (fireplace) | $189 – $289 |
| Chimney sweep (wood stove) | $249 – $389 |
| Dryer vent cleaning | $109 – $205 |
| Chimney cap installation | $350 – $525 |
| Chimney cap replacement | $350 – $550 |
| Chimney flashing repair | $450 – $950 |
| Chimney crown repair | $600 – $1,200 |
| Chimney liner installation | $2,895 – $4,500 |
In Studio City, the two things that push a price toward the top of the range are roof access difficulty on hillside lots and flue length on taller character homes. Every job gets a flat price agreed before we start, and you will see the camera evidence behind any repair recommendation.
Neighborhoods We Serve in Studio City
We work throughout Studio City’s ZIP codes 91604 and 91614, from the hillside streets above Ventura Blvd down through the neighborhoods near the Boulevard. The hillside work takes a little more time because of roof access and wind exposure, but we schedule it the same way we schedule everything else – with a straight arrival window and a technician who can handle the diagnosis without a second trip.
- Fryman Canyon
- Silver Triangle
- Colfax Meadows
- Woodbridge Park
- Studio City Hills
Service Area – Cities Near Studio City
Ontario Chimney serves Studio City and the surrounding areas, including North Hollywood, CA, Universal City, CA, Sherman Oaks, CA, and West Hollywood, CA. If you are just over the city line, call us – we will tell you honestly whether you are in our regular service area and what scheduling looks like this time of year.
Serving Studio City, CA - Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Studio City
Most routine repairs – caps, crowns, flashing, and liner installs – do not require a permit when they restore existing conditions without structural changes. If a job does need one, we will tell you before any work starts and handle the paperwork. Call (833) 467-7685 with your specific situation and we will tell you what applies.
We schedule Studio City work on a route that covers the east Valley and the hills, so most jobs land within a few days to about two weeks, tighter ahead of burn season. If you have a visible chimney problem, call (833) 467-7685 and we will give you the earliest real date, not a vague window.
It can. Some hillside HOAs have rules about cap styles or roof access. We are used to working around those requirements and can coordinate with your HOA or property manager if needed – especially for multi-unit or condo chimneys. Call (833) 467-7685 and mention the HOA when you book.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Studio City Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Bethany Padgett"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Sarah Sullivan"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Adriana Morales