Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Palm Springs, CA
Chimney repair in Palm Springs usually means working around Mid-Century Modern fireboxes that haven’t been touched since the Eisenhower administration, or newer stucco builds where desert wind has done quiet damage to caps and crowns. We’re Ontario Chimney, and we’ve served Palm Springs since 2014. The work here is different from coastal California: long idle seasons, sand-driven wind through the San Gorgonio Pass, and period masonry that owners treat as architectural provenance, not just a utility. If you need a sweep, a camera inspection, or full structural chimney repair, call (833) 467-7685 for a straight answer and a free estimate.
Why Palm Springs Homes Are Different
Palm Springs wasn’t built like most California cities. The dominant inventory is single-story 1950s through 1970s Mid-Century Modern and desert ranch homes, concentrated in tracts like Vista Las Palmas, Twin Palms, and the Racquet Club Estates. These houses came with original brick fireboxes and masonry surrounds that were designed as architectural focal points, not high-output heating appliances. Many have since been converted to gas or left decorative, but the flues still exist, and they still collect whatever the desert pushes into them.
The climate does the rest. Month after month of dry, hot, windy spring weather drives fine sand and dust into flue caps and screens. On prevailing west-wind days, north-facing flues pack with windblown sand and palm-frond debris within a single season. Then the first cool nights of November arrive and owners fire up fireplaces that have sat idle for eight months. Soot cakes, creosote glazes over, and the cycle compounds. Homes in the south end and the 92262 westside fringes, where you see more Mediterranean and newer construction, deal with the same wind and dust even if the masonry is younger. In Palm Springs, we pull and photograph crown and cap screens every fall rather than waiting for a complaint, because by November the screens are already loaded.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Palm Springs Services
Two services generate most of our calls in Palm Springs: routine chimney sweeping for the seasonal fireplace rush, and dryer vent cleaning for homes where the vent run was an afterthought in a 1960s remodel. Here’s what each involves in this city.
Chimney Sweep in Palm Springs
In Palm Springs, a sweep is rarely just a brush through the flue. We account for long idle periods that let soot harden, sand that has blown into the cap and screen, and original brick fireboxes that chip if brushed aggressively. The job includes a full camera inspection of the flue liner, removal of accumulated soot and desert debris, and a report on the crown, cap, and damper condition. If you’re in a Vista Las Palmas or Twin Palms original, we treat the firebox and surround as design material, not scrap. Full details on our Chimney Sweep in Palm Springs page.
Dryer Vent Cleaning in Palm Springs
Dryer vents in Palm Springs run through flat-roof and low-slope desert ranch construction, often with longer-than-ideal horizontal runs and exterior terminations that collect windblown sand and lint together. That combination restricts airflow, forces the dryer to work harder, and creates the conditions for a vent fire. We clean the full run, clear the exterior termination, and verify vent flow before we leave. This is a standalone fire-safety service for us, not an add-on to a sweep. Details are on our Dryer Vent Cleaning in Palm Springs page.
Chimney Repair in Palm Springs
Chimney repair in Palm Springs tends to fall into two camps. First, you have the 1950s and 1960s Mid-Century homes where the original brick firebox and terrazzo-faced hearth are architecturally valuable, but the flue liner, cap, or crown behind them has degraded after decades of desert heat cycling and wind-driven abrasion. Second, you have newer stucco and Mediterranean builds where a poorly flashed crown or missing cap has let water and sand in from the top down. Either way, we handle the full repair scope, from Chimney Repair to liner installation, crown rebuilds, and flashing replacement, so you’re not coordinating between a cleaner and a separate contractor.
Chimney Cap Installation
Signs you need it
You see rust flakes on the hearth or note sand and palm debris inside the firebox after a windy spring.
What it costs in Palm Springs
Chimney cap installation in Palm Springs typically runs $200 to $700 depending on flue size and whether the existing cap base is reusable.
How we do it
We measure the flue, select a properly sized cap from the Gelco or Famco lines we stock, and secure it to a sound crown or chase top, sealing all mounting points against wind-driven rain and sand.
Chimney Cap Replacement
Signs you need it
Your existing cap is rusted through, the mesh screen is torn, or a wind event has bent the mounting legs and shifted the cap off-center.
What it costs in Palm Springs
Chimney cap replacement in Palm Springs typically runs $250 to $750, including removal of the old cap and disposal.
How we do it
We remove the damaged cap, inspect the crown beneath for hidden water damage, and install a replacement sized for the flue with stainless steel hardware and screens rated for desert wind load.
Chimney Liner Installation
Signs you need it
Your camera inspection shows cracked clay tiles, spalling, or gaps in the mortar joints between flue sections.
What it costs in Palm Springs
Chimney liner installation in Palm Springs typically runs $2,500 to $6,000, with stainless steel systems like DuraFlex at the core of the work.
How we do it
We size the flue, pull a DuraFlex stainless liner through the existing masonry (flexible enough for offset flues common in older Palm Springs builds), insulate where needed, and secure the top plate and cap.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney chase or the flashing at the roofline is pulling away from the mortar.
What it costs in Palm Springs
Chimney flashing repair in Palm Springs typically runs $350 to $1,100 depending on chase size and the condition of the roofing material we tie into.
How we do it
We remove the old flashing, clean the masonry surface, install new step and counter flashing, and seal every transition with materials rated for high-UV desert exposure.
Chimney Crown Repair
Signs you need it
Your crown shows spider cracks, spalled concrete, or a visible dip where water pools after rain.
What it costs in Palm Springs
Chimney crown repair in Palm Springs typically runs $450 to $1,300, less when a partial patch is possible and more when a full rebuild is required.
How we do it
We clean the crown surface, fill and seal minor cracks or form and pour a new crown when the damage is structural, and cap everything beneath the existing cap or flue termination.
What Chimney Repair Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Chimney cap installation | $200 – $700 |
| Chimney cap replacement | $250 – $750 |
| Chimney liner installation | $2,500 – $6,000 |
| Chimney flashing repair | $350 – $1,100 |
| Chimney crown repair | $450 – $1,300 |
These ranges reflect what we actually charge in Palm Springs: no trip-charge games, no vague “call for pricing” after we’re on site. If a liner or crown repair is not needed, we’ll tell you plainly and show you the camera evidence to prove it.
Do I need a new liner if my chimney has never been used?
Not necessarily. If the original clay liner is intact and the fireplace is decorative or gas-converted, you may only need a cap and screen replacement plus regular cleaning. We confirm with a camera inspection before recommending any liner work, so you’re never sold a repair you can’t verify.
Can you repair a chimney without disturbing my original brick surround?
Yes. We do liner pulls from the top down, work around the firebox opening without touching original masonry, and use equipment sized for the narrow flues common in Mid-Century Palm Springs homes. Our crews here have handled enough Vista Las Palmas and Twin Palms originals to know which surfaces you don’t want marked.
Brands We Service in Palm Springs
We work with a curated set of professional-grade chimney brands, and our Palm Springs trucks carry parts from several of them for same-day cap and crown work. DuraFlex for flexible stainless liners, HeatShield for ceramic flue resurfacing, Gelco for caps, and Famco for dampers. That’s the difference between hardware-store substitutes and materials specified by the trade. See our our brands page for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Palm Springs, CA
| Service | Typical range in Palm Springs |
|---|---|
| Chimney sweep (Level 1 inspection included) | $169 – $350 |
| Dryer vent cleaning | $129 – $250 |
| Chimney cap installation | $200 – $700 |
| Chimney cap replacement | $250 – $750 |
| Chimney liner installation | $2,500 – $6,000 |
| Chimney flashing repair | $350 – $1,100 |
| Chimney crown repair | $450 – $1,300 |
| HeatShield ceramic flue resurfacing | $900 – $2,500 |
| Chimney damper repair or replacement | $250 – $650 |
What pushes a Palm Springs job toward the higher end: original 1950s flues that are undersized or offset and require a flexible DuraFlex liner instead of a rigid pipe, caps that have taken a decade of sandblast wind and need full replacement rather than repair, and crown damage on homes where the UV exposure has spalled the concrete down to the aggregate. The one thing you’ll never see is a price that changes after the truck shows up. Our quotes are fixed before we start, and if the scope changes, we stop, show you the evidence, and re-price with you looking at the same camera image we are.
Neighborhoods We Serve in Palm Springs
We work across the full Palm Springs footprint, from the Mid-Century tracts of Vista Las Palmas, Twin Palms, and the Racquet Club Estates, through the older Desert Park and Sunmor neighborhoods, out to the south end’s Mediterranean builds, and into the 92262 westside fringes. Our crews know the ZIP-level quirks here, from 92262 through 92264 and 92292, including which neighborhoods have the original chimney hardware worth preserving.
- Vista Las Palmas
- Twin Palms
- Racquet Club Estates
- Desert Park
- Sunmor
We typically schedule Palm Springs sweeps and inspections within 10 to 14 days year-round, and run a lighter schedule through the November-to-February fireplace season so period homes get in before the first cold snap. Call (833) 467-7685 to hold a date.
Service Area – Cities Near Palm Springs
Our Palm Springs crews also cover the surrounding Coachella Valley. If you’re in Cathedral City, CA, Rancho Mirage, CA, Garnet, CA, or Desert Hot Springs, CA, we can schedule the same inspection, camera report, and repair work. The desert-wind issues we see in Palm Springs don’t stop at the city line; we handle the same sand-in-the-cap and crown-cracking conditions valley-wide.
Serving Palm Springs, CA - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Palm Springs
For active leaks, visible masonry damage, or suspected flue blockage, we can typically reach Palm Springs within 3 to 5 business days. Non-urgent sweeps and inspections run 10 to 14 days out. Call (833) 467-7685 and tell us what you’re seeing, and we’ll tell you how soon we can be there and whether anything needs immediate attention before we arrive.
Most Palm Springs HOA-governed communities, especially the historically designated Mid-Century tracts, require architectural review before any exterior chimney modification like a cap replacement or crown rebuild. Interior work like a sweep or liner installation generally does not. We can photograph the existing conditions for your HOA submission and work from the approved scope.
Yes. We work with rental owners and property managers across Palm Springs on documented sweeps, vent cleanings, and repair work for multiple units. We provide individual camera reports per property, so you have a file for each address and don’t have to be on site for every job. Call (833) 467-7685 to set up a multi-unit schedule.
If you own a Palm Springs home with a chimney you haven’t inspected since you bought it, or you’re heading into your first November in a 1960s original, call (833) 467-7685. We’ll tell you what we found, show you the evidence, and give you options, with a free estimate and no pressure to fix anything the camera doesn’t show is broken.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Palm Springs Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Sarah Sullivan"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Adriana Morales"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Tara Novak