Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Chino
A chimney sweep in Chino typically runs $160 – $240 for a standard open-masonry fireplace and $130 – $190 for a factory-built gas unit, and most jobs are done in 60 – 90 minutes. We work the 91710 core and the 91708 growth corridor every week, so we know exactly what each side of town throws at a flue. If you’re looking at a fireplace that hasn’t been inspected in years, call (833) 467-7685 and we’ll schedule a sweep with camera inspection, not just a brush-and-go.
Chino splits into two very different chimney populations. West of the 71, in 91710, you have mid-century ranch homes with original clay-tile flues and masonry fireboxes that deserve real attention. East of the 71, in 91708, the newer infill and townhome developments run factory-built gas units that need a different service entirely. Being fluent in both is what makes a sweep here actually useful. We don’t treat your direct-vent gas fireplace like a 1960s masonry stack, and we don’t skip the camera on a 1962 ranch because “it looked fine from the top.” Call (833) 467-7685 for a free estimate, or read on to understand what a proper sweep in Chino should include.
Why Ontario Chimney Is Chino’s Preferred Chimney Sweep Company
We’re not a pressure-washing outfit that added chimney sweeping to the menu. Ontario Chimney is a full-service chimney and venting company led by Al Vickers, and our techs handle sweeping, dryer vent cleaning, and structural repair under one roof. That matters in Chino specifically because the older 91710 homes often need more than a sweep: they need someone who can identify spalling firebox mortar, damaged clay tiles, and cracked crowns during the same visit, then fix them without handing you off to a third contractor.
Chino homeowners call us because we show them the footage. That’s the whole trust model. Before we recommend a liner repair, a HeatShield resurfacing, or anything beyond a standard sweep, you see the camera video yourself. No one on our crew will tell you a clay-tile flue is shot and then refuse to prove it. In the 91710 neighborhoods especially, where “sweeps” have historically been a brush through the firebox and a handshake, that level of transparency changes the conversation completely. We bring one company from inspection through repair, so you’re never caught between a cleaner who found a problem and a contractor who won’t return your calls.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Gas Fireplace Cleaning in Chino
Gas fireplace cleaning in Chino is a manufacturer-specific service, not a brushed-down masonry job, and it’s the one we see skipped most often in the 91708 corridor’s townhomes and newer two-story builds. Your direct-vent unit still accumulates dust, debris, and pet hair around the burner and pilot assembly, and over a few Chino summers of disuse, that buildup can affect ignition and flame quality. We clean the glass, vacuum the firebox, check the burner ports, and inspect the venting path using the unit’s manual, not a one-size-fits-all approach.
Burner and Pilot Service
A gas fireplace in an 91708 townhome gets dusty just sitting there. Chino’s dry season means more airborne particulates, and that dust settles directly into the burner assembly. We pull the logs or glass media, clean the burner carefully, and confirm the pilot and thermocouple are working before we reassemble. This is standard maintenance, and on most factory-built units it takes under an hour.
Direct-Vent Log and Glass Media Check
Modern gas fireplaces have venting that isn’t a chimney in the traditional sense, but it still needs to be clear. We inspect the termination cap outside, check for wasp nests or debris (common in Chino’s hotter months), and confirm the unit is drafting properly. If your glass is clouded or your media is discolored, we’ll tell you what’s cosmetic and what’s a symptom.
Chimney Maintenance in Chino
Chimney maintenance in Chino means one thing first: a camera up the flue. Brush-only sweeps are common here, and they’re the reason we find third-degree creosote and spalling clay tiles in homes that were “just swept” two years ago. In the 91710 ranch stock especially, original clay-tile liners with mortar joints that have never been inspected are the norm. We run a video scope on every sweep, not just repair calls.
Creosote and Soot Removal
Chino’s long hot dry season is the quiet trap. A fireplace sits unused from March to November, and whatever creosote was left from winter hardens into a glaze. First-degree creosote brushes out. Third-degree creosote doesn’t. When we find glaze, we tell you plainly what a chemical treatment can do and what it can’t, and we show you the footage before any recommendation. Standard creosote and soot removal runs $160 – $240 depending on buildup.
Annual Sweep for Masonry Fireplaces
If you burn wood regularly in a 91710 fireplace, an annual sweep is not overkill. It’s the interval that keeps creosote from accumulating to the point where it becomes a fire or flue-liner problem. Our annual sweep includes the camera inspection, damper check, smoke chamber look, and firebox assessment. The same visit tells you whether your chimney can safely wait another year or needs attention now.
Trusted Brands We Service in Chino
We work with a curated set of professional-grade materials because what goes into your chimney determines how long the repair lasts. When a Chino home needs relining, we install DuraFlex flexible stainless systems, the benchmark for offset flues in older ranch chimneys. For resurfacing, we’re certified applicators of HeatShield ceramic flue restoration. Components like caps and dampers come from Famco and Copperfield, the same suppliers specified by certified chimney professionals, not what you’d find at a big-box store. That matters when the repair has to survive Chino’s Santa Ana-driven ember season.
Common Chimney Sweep Problems We See in Chino Homes
- Third-degree creosote glaze in 91710 ranch chimneys. Years of hot, idle summers harden winter creosote into a tar-like glaze that a brush cannot remove. We find this constantly in homes where the previous sweep never ran a camera.
- Spalling firebox mortar and cracked clay tiles. In Chino’s 1950s – 70s stock, the firebox and flue are often original. Hairline cracks in clay tiles let heat and gases reach the surrounding masonry, and they only show up on camera.
- Mis-serviced factory-built gas units in 91708. Townhome gas fireplaces get treated like masonry stacks by generalist cleaners. Burner ports go uncleaned, glass stays clouded, and the direct-vent termination is never checked.
- Ember and spark concerns during Santa Ana season. Chino’s dry brush and wind events make a functioning spark arrestor and cap more than an afterthought. We check yours on every sweep because an ember out of the top is a genuine inland risk.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Chino, CA
A standard masonry chimney sweep in Chino runs $160 – $240. Gas fireplace cleaning runs $130 – $190. If you add a Level 2 camera inspection (which we include on most sweeps anyway), you’re not adding a separate surprise line item: we build the camera into the visit. If your flue needs a chemical treatment for third-degree creosote, expect $80 – $150 added, applied only after you’ve seen the footage. A HeatShield resurfacing or DuraFlex relining is quoted case by case, and the quote follows the video, not the other way around. Call (833) 467-7685 for an exact price on your Chino home, and the estimate is free.
We Also Serve Cities Near Chino
Ontario Chimney covers Chino and the surrounding Inland Empire communities. We’re regularly in Los Serranos, Ontario, Montclair, and Eastvale for the same Chimney Sweep work we do here, from clay-tile camera inspections to factory-built gas fireplace service. If you’re a property manager with units spread across the 91710 and 91708 corridors, one call covers the whole map.
Serving Chino, CA - Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Chino
You don’t, unless someone runs a camera up the flue. Clay-tile damage in 91710 ranch chimneys shows up as cracked or spalled tiles, deteriorated mortar joints between tile sections, or gaps where the flue has shifted. A brush-only sweep cannot see any of that. The only way to know is a visual inspection with a video scope, which is exactly what we do on every sweep in Chino. If your last sweep took 20 minutes and produced no photos, assume the tiles were never checked. Call (833) 467-7685 and we’ll show you the footage.
They need manufacturer-specific cleaning and inspection, not a traditional brush sweep. The 91708 corridor’s direct-vent gas units use a sealed combustion system with a coaxial vent, not an open flue. That vent still gets blocked by debris, wasp nests, or deteriorated termination caps, and the burner and pilot still collect dust through Chino’s dry months. We clean the glass, burner, and venting per the unit’s manual, and we confirm proper operation. If you own a gas fireplace in a Chino townhome and it’s been more than two years, it’s due.
The long hot season bakes creosote into a hardened glaze. In Chino, fireplaces burn December through February, then sit unused for eight or nine months. During that time, the residue from winter fires doesn’t just sit there: it dries, shrinks, and bonds to the flue wall. What starts as first-degree (brushable) creosote becomes second- or third-degree glaze that a standard sweep cannot remove. That’s why an inspection after a long idle stretch matters more here than in cooler climates where fireplaces burn year-round. Call (833) 467-7685 to schedule a camera check before the next burn season.
First-degree creosote is a dry, sooty powder that brushes out easily during a routine sweep. Third-degree creosote is a hard, glossy, tar-like glaze that bonds to the flue and won’t come off with a brush at all; it requires chemical treatment or mechanical removal. It matters because third-degree creosote both restricts draft and, in worst cases, can ignite in a chimney fire. A chimney that sits through Chino’s long hot season is more likely to develop the hardened form. We show you which type you have on the camera before we recommend anything. Call (833) 467-7685 for a free estimate.
Yes, our sweep includes a visual check of the crown, flashing, and cap from the roof. We look for cracked crowns, corroded flashing, and missing or damaged spark arrestors, all of which matter in Chino’s wind and ember season. If we find crown damage, we’ll show you photos and tell you whether it can wait or needs repair. The check is part of every sweep, not an upgrade. Call (833) 467-7685 to schedule yours.
Contact Ontario Chimney for Your Chino Chimney Sweep
If your Chino home has a fireplace that hasn’t been camera-inspected, or a gas unit that’s been treated like an afterthought, call us. We’ll send a trained technician, run the video scope, and show you exactly what’s in your flue before any repair is recommended. One company, from inspection to repair, with materials like DuraFlex, HeatShield, and Famco that the trade actually specifies. Call (833) 467-7685 for a free estimate.
Written by Al Vickers, Owner at Ontario Chimney, serving Chino and the Inland Empire.