Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Highgrove
A standard chimney sweep in Highgrove runs $165 to $285, depending on flue condition and access. We book most Highgrove appointments within 5 business days, and we show you photos of your flue before and after the work so you can see exactly what was removed. Highgrove’s chimneys collect a specific kind of mess during the long dry season, and clearing it properly takes more than a brush on a rod. Call (833) 467-7685 for a straight answer and a free estimate.
Why Ontario Chimney Is Highgrove’s Preferred Chimney Sweep Company
Most of the calls we get from Highgrove and the 92313 ZIP start the same way: the first fire of the season pushed smoke into the living room, and the homeowner wants to know why. We spent years working chimneys across the Inland Empire, and the 1950s-to-1980s houses that make up most of Highgrove have their own pattern of problems. Clay flue tiles, original masonry, long idle stretches between burns. You can’t fix what you haven’t seen, which is why every sweep we do in Highgrove includes a camera check of the flue.
Al Vickers, the owner, set Ontario Chimney up to handle the whole chimney, not just the easy part. When our Highgrove customers need a sweep and a repair, they’re not handed off to a contractor they’ve never met. The same team that sweeps your flue also handles liner work, damper systems, and structural repairs, using materials from suppliers like Copperfield and Olympia Chimney rather than whatever is on the shelf at the hardware store.
You’ll get a written report and camera images from us, especially when we find a cracked tile or a liner that needs attention. That’s how Highgrove homeowners can see a problem before they’re asked to pay for a fix. We’d rather show you a cracked flue tile on camera than tell you about one over the phone.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Maintenance in Highgrove
Chimney maintenance in Highgrove is about the long idle season, not the heavy burn season. A fireplace that sits for eight or nine months collects nests, dust, and creosote shards that harden in the heat. Here, the first December fire is often the test that reveals the blockages, so maintenance has to happen before that moment, not after. A basic maintenance visit in Highgrove runs $145 to $220 and includes a visual inspection, damper check, and light cleaning of the firebox and smoke shelf.
Seasonal Pre-Burn Readiness
Before you light the first fire near Thanksgiving, the chimney needs a clear path from firebox to cap. Our maintenance call includes removing surface creosote and any debris that drifted in during Santa Ana events. If we find a nest or a cracked tile, you’ll see it on camera before we recommend anything.
Annual and Occasional-Use Plans
Even if you only burn a few fires each winter, the chimney still collects creosote from those burns. Occasional fires produce cooler, smokier combustion that deposits more creosote per fire than a hot daily burn ever would. A maintenance sweep every 12 to 18 months fits most Highgrove homes well.
Chimney Sweep Services in Highgrove
Chimney sweep services in Highgrove typically run $165 to $285 for a full sweep with camera inspection, with level 2 inspections adding $75 to $150 depending on scope. The sweep itself is mechanical brushing plus HEPA vacuum capture, but the real value in this area is the inspection that comes with it. Highgrove’s older flues hide damage that only becomes visible under camera light, and a sweep is often the first chance to catch it.
Creosote and Soot Removal
We remove first, second, and third-degree creosote from fireplace flues, fireboxes, and smoke shelves. Third-degree creosote, the hard shiny glaze that builds from low-temperature fires, requires rotary tools and chemical treatment, and it is the leading chimney fire fuel in Riverside County homes.
Level 1 and Level 2 Inspections
A level 1 inspection covers the accessible portions of the chimney and is included with every sweep. When the home has changed hands, the fireplace has been dormant for years, or we need to see the flue interior in detail, we run a level 2 camera inspection. Highgrove’s 92313 is full of mid-century homes that have never had a flue camera run, and homeowners are usually glad once they see the photos.
Trusted Brands We Service in Highgrove
When a Highgrove chimney needs more than a sweep, we reach for the brands the trade actually specifies. Chimney Sweep repair and liner work in this area should be done with components that hold up to Riverside County heat cycles, which is why we use DuraFlex stainless steel liners for relining jobs and Famco caps and dampers for top-sealing systems. HeatShield ceramic resurfacing is our preferred fix for flues with cracked clay tiles, and it saves Highgrove homeowners from a full tear-out when the damage is moderate. These are professional distribution materials from Copperfield and Olympia Chimney, not big-box substitutions, and we can usually quote and schedule within two weeks of a sweep.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Highgrove Homes
- Bird and rodent nests above the damper. Highgrove’s open lots and citrus groves attract wildlife looking for warm, protected spaces. The chimney is exactly that, and nests block the flue by the time the first fire goes in.
- Cracked clay flue tiles in mid-century fireplaces. After 40 to 70 years of thermal cycling, the original tile liners in Highgrove’s housing stock develop cracks that let creosote and moisture reach the masonry.
- Santa Ana dust and debris under the cap. Dry winds push fine dust and leaves into uncapped or poorly capped flues, accelerating crown spalling and mixing with creosote into a paste that clogs the smoke shelf.
- First-fire smoke backup in November and December. When the first cold night hits, homeowners light a fire in a chimney that has sat full of debris for months. The smoke has nowhere to go but back into the room, and that’s the call we get most.
Pricing for Chimney Sweep in Highgrove, CA
Expect to pay between $165 and $285 for a standard sweep in Highgrove, which includes the brush work, vacuum capture, damper check, and a camera glance at the flue. A level 2 camera inspection adds $75 to $150 if we need the full interior view. If your flue has third-degree creosote, that’s a rotary treatment and costs $350 to $600 depending on flue height and access. Everything gets quoted flat before we start, and the estimate is free. Call (833) 467-7685 and we’ll give you a real number for your specific chimney, not a phone-script range.
We Also Serve Cities Near Highgrove
Our team covers Highgrove and the surrounding Inland Empire communities, including Grand Terrace, Colton, Loma Linda, and Rubidoux. If you’re in one of those cities and your chimney hasn’t been looked at in years, the same inspection and sweep applies. Call (833) 467-7685 and we’ll get you on the schedule.
Serving Highgrove, CA - Our Local Coverage Area
We serve Highgrove and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Highgrove
The first fire often smokes because a bird or rodent built a nest in the flue during the months the fireplace sat idle. Highgrove’s open lots and citrus groves make this more common than in denser neighborhoods. Occasionally it’s a damper left half-open or a cracked flue tile. Call (833) 467-7685 and we’ll find it fast.
Every 12 to 18 months is realistic for light use, and here’s why: occasional fires burn cooler and deposit more creosote per burn than a daily hot fire would. One or two holiday fires a year still leave a layer behind. It doesn’t take many seasons for that layer to become a fire hazard or a blockage.
Yes, and you should expect that from any chimney company. We run a camera down the flue on every sweep in Highgrove, and if we find a cracked clay tile, you’ll see the image and we’ll point out exactly where it is. You’re not asked to approve a liner repair until you’ve seen the evidence yourself. Call (833) 467-7685 for a sweep with camera proof.
First-degree creosote is the soft, flaky soot that brushes off a flue easily. Third-degree is the hard, shiny glaze that forms from prolonged low-temperature burns. It requires rotary tools and chemical treatment to remove, and it’s the most dangerous type because it ignites at lower temperatures and burns hot. Highgrove’s occasional weekend fires often create exactly the right conditions for this to form. Call us if you haven’t had the flue inspected in over a year.
We work with both. HeatShield ceramic resurfacing is one of our standard repair options for cracked flue tiles, and we source materials through Copperfield and Olympia Chimney, the two biggest professional distributors in the trade. If your mid-century fireplace needs relining, we use DuraFlex stainless steel, which handles the offset flues common in older Highgrove homes. Call (833) 467-7685 to schedule an inspection.
Written by Al Vickers, Owner at Ontario Chimney, serving Highgrove and the Inland Empire.