Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Dryer Vent Cleaning for Ontario Homeowners
Dryer vent cleaning in Ontario, CA typically costs between $129 and $249 for a single-family home and takes about 45 to 90 minutes from setup to final airflow test. The real reason homeowners call us isn’t the lint you can see in the trap. It’s the lint packed deep in the vent run behind the wall, where it becomes a fire hazard that the NFPA identifies as a leading cause of home dryer fires. Al Vickers and the Ontario Chimney team have cleaned thousands of dryer vents across the Inland Empire, and we bring the same professional-grade approach to vent work that we use on chimney systems. Call (833) 467-7685 to schedule your cleaning.
What Our Dryer Vent Cleaning Service Includes
Full Vent Run Cleaning
Most dryer vent cleanings you’ll see advertised only address the first few feet of pipe behind the dryer. That’s not enough. We run professional rotary brushes and high-pressure air through the entire vent run, from the dryer connection point to the exterior termination cap. In Ontario homes with laundry rooms on interior walls, these runs can stretch 15 to 30 feet, with multiple elbows where lint accumulates. Our equipment is sized for residential vent runs, and we verify airflow at the exterior exit before we call the job done.
Lint Trap and Housing Cleaning
The lint screen catches a lot, but fine particles still slip past and pack into the trap housing and the first few inches of duct. We remove the trap assembly, clean the housing thoroughly, and inspect the screen itself for wear. A bent or torn lint screen lets significantly more debris into the vent run, which means your cleaning won’t last as long. We’ll flag that and tell you whether a replacement is worth the small cost.
Exterior Vent Cap and Termination Point
The exterior cap is where we often find the biggest surprises in Ontario: bird nests, wasp activity, or a flapper that’s stuck shut from lint buildup. We clean and clear the cap, make sure the damper opens and closes freely, and confirm that nothing is blocking airflow at the exit. A blocked exterior termination is one of the fastest ways to overheat a dryer, and it’s easy to miss because most homeowners never look at it.
Airflow Verification
Before we leave, we measure airflow performance to confirm the vent is actually moving air the way it should. Weak airflow after a full cleaning tells us there’s a deeper problem: a crushed pipe, a disconnected joint, or a run that’s too long for code. We’ll show you what we measured, what it means, and whether your vent is performing as it should. That’s the difference between a cleaning and an actual assessment.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Styles & brands we work with
Brands We Service for Dryer Vent Cleaning
If your dryer is a Whirlpool, Maytag, LG, Samsung, GE, or Speed Queen, we know the vent connection specifics for each. The connection collar geometry differs between brands, and getting a poor seal at the dryer side defeats half the purpose of the cleaning. We carry the proper fittings and know how each manufacturer’s vent system is designed, so the connection is tight and the airflow goes where it’s supposed to.
We also work with venting components supplied by Famco and Copperfield, two names that show up frequently in professionally installed dryer vent systems. Famco termination caps and Copperfield ducting components are built to a higher standard than the foil flex pipe sold at home centers. Whether you have a professional-grade vent system already installed or you’re still running the original builder-grade duct, we can clean it, test it, and tell you honestly whether an upgrade is worth considering. Any make, any configuration, we’ll handle it.
Signs You Need Dryer Vent Cleaning Right Now
- Your dryer takes two or three cycles to finish a load. When a vent is packed with lint, moist air can’t escape efficiently. The dryer’s sensors keep shutting the cycle off early because heat isn’t moving through the drum properly. If you’re running a load twice to get it dry, the vent is the most likely culprit.
- The exterior vent flap isn’t opening when the dryer runs. Walk outside while the dryer is on and check the cap. If the flapper is stuck shut or barely moving, you’ve got a significant airflow restriction. This is often the first visible sign of a blockage that’s been building for months.
- The laundry room gets hot and damp during cycles. Hot, humid air should be going out the vent, not backing up into your utility room. If the room feels like a sauna when the dryer runs, that’s exhaust air escaping somewhere it shouldn’t. It’s also a sign that carbon monoxide from a gas dryer could be entering the living space instead of venting outside.
- You notice a burning or musty smell when the dryer runs. Lint against a heating element smells like burning paper or fabric. A musty smell means moisture is trapped in the vent run, which accelerates lint packing and creates a place for mold to grow. Either smell means it’s time for a professional cleaning before the next load.
- It’s been more than a year since your last cleaning. The NFPA recommends annual dryer vent cleaning for most households. Homes with long vent runs, multiple elbows, or heavy laundry use may need it every 6 to 9 months. If you can’t remember when your vent was last cleaned, that’s your answer.
Our Dryer Vent Cleaning Process – Step by Step
- 1
Inspection and Setup. We start by pulling the dryer out far enough to access the vent connection and examine the full run if it’s visible in an attic or crawlspace. We check for crushed or disconnected sections, improper materials like foil or vinyl duct, and any existing damage to the termination cap. Before we clean anything, we know exactly what we’re working with. We protect the floor by laying down drop cloths and do the same for the work area around the dryer.
- 2
Rotary Brush Cleaning. We use a professional rotary brush system with flexible rods that navigate the full vent run, including elbows and offsets. The brush spins as it feeds through, scrubbing caked-on lint from the pipe walls. It’s far more aggressive and more thorough than a vacuum alone, which only removes loose debris from the middle of the duct. We work from both ends where possible to ensure full coverage.
- 3
High-Pressure Air Purge. After brushing, we sweep the entire vent run with high-pressure air to blow out anything the brush loosened. This step also helps us verify there are no hidden blockages, because the debris exits at the exterior cap where we can see it. We collect all material at the exit point and confirm the pipe is clear from end to end.
- 4
Component Cleaning and Reassembly. We clean the lint trap housing, remove debris from the trap screen, clear the exterior cap, and check that the flapper damper functions properly. Then we reconnect the dryer, ensuring the vent collar is seated correctly and sealed. If we find any worn components, like a broken flapper or a damaged connector, we’ll show you and offer to replace them with professional-grade parts from suppliers like Famco.
- 5
Airflow Test and Report. The final step is measuring airflow at the exterior exit to confirm the system is working at full capacity. We record the reading and give you a clear summary of what we found, what we did, and any recommendations for follow-up. You’ll know exactly what condition your vent is in before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Dryer Vent Cleaning Cost in Ontario?
A standard dryer vent cleaning in Ontario runs $129 to $249 for most single-family homes. The exact price depends on a few things: the length of the vent run, how easy it is to access, and how heavily it’s packed with lint. Single-story homes with short, straight runs fall at the lower end. Two-story homes with long runs, multiple elbows, or rooftop terminations come in higher because of the additional time and equipment involved. If you have a townhome or condo with a shared vent stack, pricing works differently, and we’ll assess that before we quote.
What affects the price? The main factors are run length, access difficulty, and the condition of the existing vent system. A vent that hasn’t been cleaned in five years will take longer to clear than one that was serviced last year. If we find damage, like a crushed section or a disconnected joint, repairing it is quoted separately and only with your approval. What should make you wary? Rock-bottom pricing that covers only the first few feet of ductwork, or companies that quote without seeing the vent first. A legitimate cleaning addresses the entire run. Our estimates are free, we’ll tell you the price before any work begins, and there’s no obligation. Call (833) 467-7685 for a quote specific to your Ontario home.
Dryer Vent Cleaning Near Ontario – Our Service Area
We provide Dryer Vent Cleaning in Ontario and throughout the surrounding Inland Empire communities. Our service area includes Upland, Montclair, Chino, Rancho Cucamonga, Claremont, Pomona, San Antonio Heights, Los Serranos, La Verne, Eastvale, and Jurupa Valley. Most vent cleanings are scheduled within a few days, and we group appointments by area to serve homeowners efficiently. If you’re in Upland or Montclair, you’re well within our regular route. For everything else we handle, start at our home page.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions – Dryer Vent Cleaning in Ontario
Dryer vent cleaning is the process of removing built-up lint, dust, and debris from the entire duct that carries hot exhaust air from your dryer to the outside of your home. It involves brushing and air-purging the full vent run, cleaning the lint trap housing, and clearing the exterior termination cap. The purpose is to restore proper airflow, reduce fire risk, and keep your dryer operating efficiently. A proper cleaning addresses the whole vent, not just the first few feet.
Most residential dryer vent cleanings in Ontario take between 45 and 90 minutes. The specific time depends on the length of the vent run, how heavily it’s packed, and how accessible the termination point is. We’ll give you a realistic window when you schedule, and we’ll confirm when we arrive and see the setup. If you’d like a more precise estimate for your home, call (833) 467-7685.
Expect to pay $129 to $249 for a standard single-family dryer vent cleaning in Ontario, with most homes landing in the middle of that range. Longer runs, difficult access, and heavy buildup can push the price higher, and we’ll always quote before we start. A free estimate is available with no obligation, so you can call (833) 467-7685 to get an exact number for your home.
Yes, we clean dryer vent systems for every major brand, including Whirlpool, Maytag, LG, Samsung, GE, Electrolux, and Speed Queen. The vent connection design varies slightly between manufacturers, and we carry the proper fittings to match each. We also work with professionally installed venting components from suppliers like Famco and Copperfield, so we’ll be familiar with whatever’s in your laundry room.
We don’t provide emergency same-day dispatch, but we do prioritize homes with active warning signs like burning smells or severely restricted airflow. If you notice a burning odor or your exterior vent is completely blocked, stop using the dryer and call (833) 467-7685. We’ll work to get you scheduled as quickly as our current schedule allows, typically within a few days.
We stand behind our work with a satisfaction guarantee: if you’re not satisfied with the cleaning, we’ll return and address the issue at no additional cost. Every cleaning includes a full airflow verification before we leave, so you’ll have objective evidence that the vent is performing properly. If anything comes up after we’ve left, call (833) 467-7685 and Al will make it right.
Clear a path to the dryer so we can pull it out and access the vent connection, and remove any items from on top of the machine. If your laundry room is small, it helps to move hampers, baskets, or shelving that block access to the back or side. We handle everything else, including protecting your floor and the work area, so there’s no need to clean up before we arrive. We’ll confirm these details when you schedule.
Schedule Your Dryer Vent Cleaning Service in Ontario Today
Don’t wait until the signs get worse. A clogged dryer vent is the most preventable fire hazard in most Ontario homes, and a professional cleaning costs less than the deductible on a house fire. Al Vickers and the Ontario Chimney team will inspect your vent, clean it properly, and show you the results with airflow numbers to prove it. Call (833) 467-7685 today for a free, no-obligation estimate. We serve all of the Inland Empire, and we’d be glad to get your home scheduled.
Written by Al Vickers, Owner at Ontario Chimney, serving Ontario and the surrounding Inland Empire.