Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Manhattan Beach
A chimney sweep in Manhattan Beach typically runs $189 – $279 for a standard fireplace with a Level 1 inspection included, and most jobs are completed in 60 – 90 minutes. That’s the number most Manhattan Beach homeowners want first, so there it is. Ontario Chimney has been working chimneys from the Sand Section up to the Tree Section and over to the Hill Section long enough to know exactly what the salt air does to a flue, and we book Manhattan Beach jobs every week. If you need a sweep, an inspection, or a repair quote, call (833) 467-7685 and Al Vickers will get you scheduled.
Why Ontario Chimney Is Manhattan Beach’s Preferred Chimney Sweep Company
Manhattan Beach homeowners tend to do their homework before they let anyone onto their roof, and that’s fair. A lot of the older homes here, especially the 1940s and 1950s cottages in the 90266 zip, have original masonry chimneys that were never designed for decades of marine-layer exposure. We work on those every month. Our Chimney Sweep team knows what a spalled crown looks like on a Sand Section walk-street lot versus what it looks like inland, because the salt-air corrosion and wind-driven moisture here follow a predictable pattern. Homeowners in Manhattan Beach call us back not because we’re the cheapest, but because we tell them what matters and show them the proof with a camera before recommending a single repair.
We’re led by Al Vickers, and our techs are cross-trained across all three service lines: sweeping, dryer vent cleaning, and structural chimney repair. That means when we’re on a Manhattan Beach roof and we see a rusted damper during a sweep, we can tell you whether it needs replacement now or can wait, and we can do the work ourselves. No handing you off to another contractor. No coordination gap. One company from inspection to repair. That continuity matters even more on homes where the chimney hasn’t been used in two years and you’re not sure what you’re walking into.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Manhattan Beach
Chimney Services in Manhattan Beach means something specific out here: dealing with a fireplace that gets lit maybe a dozen times a year while the ocean does the real damage year-round. The salt air rusts dampers and fireboxes, pests move into unused flues during mild winters, and Santa Ana winds drop debris onto roof caps. A proper service call here starts with a full inspection of the flue, damper, cap, crown, and firebox, then moves to creosote removal or soot removal as needed. We’ll tell you what we found, show you the evidence, and give you options.
Level 1 and Level 2 Inspections
A Level 1 inspection comes standard with every sweep and covers the accessible portions of the chimney. In Manhattan Beach, we also recommend a Level 2 inspection whenever a home changes hands, which happens constantly in the 90266 and 90267 zips, or after any event that might have disturbed the flue, like a small chimney fire or seismic activity. The Level 2 uses a camera to document exactly what’s inside, and you get the footage. That’s particularly valuable on remodeled beach cottages where previous owners may have changed venting configurations during a renovation.
Annual Sweep and Fireplace Cleaning
An annual sweep in Manhattan Beach typically runs $189 – $279 for a masonry fireplace. That covers creosote removal from the flue and smoke chamber, soot cleanup in the firebox, and the Level 1 inspection. Fireplace cleaning alone, without the flue work, runs $125 – $175. If you burn fires infrequently, don’t assume you can skip the sweep. We explain why below, but the short version is: the salt air and unused-flue pest problem makes the inspection the most valuable part of the visit out here.
Chimney Sweep Certified in Manhattan Beach
Chimney Sweep Certified in Manhattan Beach means a technician has the training to assess a flue that’s been sitting idle in a corrosive coastal environment, not just one that’s loaded with creosote from nightly winter burns. Every sweep we do in Manhattan Beach includes the same standard: remove creosote, clean the firebox, inspect the damper throat and cap for rust, and run a camera where warranted. A standard sweep runs $189 – $279, and if we find first-degree creosote, the extraction is often straightforward. If we find third-degree creosote, that’s a different conversation and it changes the scope of the job.
Creosote Removal
First-degree creosote is a flaky, sooty layer that brushes off without much trouble. Third-degree creosote is a hardened, glossy, tar-like crust that ordinary sweeping tools can’t remove safely. In Manhattan Beach, we see more than our share of both, because a fireplace that gets lit sparingly on damp winter evenings never reaches the sustained heat that would burn off first-degree creosote. That means it sits and accumulates, and it can harden over time. We’ll tell you which one you have before we quote the work.
Soot Removal and Fireplace Cleaning
Soot removal in a Manhattan Beach fireplace costs $125 – $175 as a standalone service. It covers the firebox floor and walls, the damper, and the visible smoke shelf. On older homes where someone burned unseasoned wood or those composite logs years ago, the soot can be caked and acidic, which accelerates metal damage on dampers and lintels. Cleaning it properly before the next burn season helps the whole assembly last longer, which matters when replacement parts cost hundreds just for the component.
Trusted Brands We Service in Manhattan Beach
We don’t install hardware-store parts. The components we stock and service come from Copperfield and Olympia Chimney, the two largest professional chimney supply distributors in the trade. When a Manhattan Beach cap has rusted out from salt spray, we replace it with a Gelco stainless cap that’s designed for coastal exposure, and when a damper is seized, we look to Famco or Copperfield for the replacement. For relining work, we use DuraFlex flexible stainless liners, which matters on older Manhattan Beach flues with offsets that rigid liners can’t navigate. We keep common parts in stock for faster turnaround on Manhattan Beach jobs, because waiting three weeks for a cap while a flue sits open isn’t acceptable out here.
Common Chimney Sweep Problems We See in Manhattan Beach Homes
- Salt-air rust on dampers and fireboxes. The marine layer and onshore salt air rust damper assemblies, firebox doors, and throat plates faster in Manhattan Beach than almost anywhere else in the South Bay. Most homeowners don’t notice until smoke backs up on the one night a year they actually light a fire.
- Pest nests in flues that go unused. Mild, damp winters here are ideal for birds and bees, and a chimney that hasn’t been capped properly or has a damaged cap becomes a nesting site. We’ve pulled bird nests, bee hives, and once a full raccoon’s worth of debris out of unused flues in the Sand Section.
- Spalling on original 1940s masonry. The older beach cottages in 90266 have brick chimneys that were built when Manhattan Beach was mostly modest post-war housing. Decades of salt air and occasional winter rain cause the mortar to spall and the crown to crack, which lets water into the flue and the attic.
- Rusted caps on homes near the pier. Chimneys within a few blocks of the water take the worst of it. We replace more rusted and failed caps in the Sand Section than in all the inland neighborhoods combined. A failed cap is a quiet problem until a storm blows debris into the flue and the water damage has already started.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Manhattan Beach, CA
Here’s what you should expect to pay in Manhattan Beach:
- Standard chimney sweep with Level 1 inspection: $189 – $279
- Fireplace cleaning only: $125 – $175
- Level 2 inspection with camera: $299 – $449
- Chimney cap replacement (stainless, installed): $325 – $575
- Rusted damper replacement: $275 – $450
What moves the price? Access. Homes on walk streets with tight side yards or steep roof pitches take longer and sometimes need a second tech. Multiple fireplaces also change the math, since each flue gets its own sweep and inspection. If we find third-degree creosote, that’s a mechanical removal job, not a brush sweep, and we’ll show you the camera footage before quoting that work. Call (833) 467-7685 and we’ll give you a fixed price before any work begins. The estimate is free.
We Also Serve Cities Near Manhattan Beach
Our crews run throughout the South Bay, so if you’re in Redondo Beach, Rolling Hills Estates, Palos Verdes Estates, or Torrance, we can get to you same week. For a full look at how we serve the area, see Chimney Sweep in Manhattan Beach, or call (833) 467-7685 to book in any nearby city.
Serving Manhattan Beach, CA - Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Manhattan Beach
Once a year, even if you burn once. In Manhattan Beach, the inspection is the point of the visit, not just the creosote removal. Salt air corrodes dampers and caps year-round, pests move into unused flues during damp winters, and the only way to catch those problems before they become expensive is an annual look. A standard annual sweep with inspection runs $189 – $279. Call (833) 467-7685 and Al Vickers can get you on the schedule.
Yes, we sweep Salt Section chimneys with spalled mortar all the time. The sweep itself doesn’t change, but we’ll flag the structural condition separately and show you photos. In Manhattan Beach’s Sand Section and near the pier, salt-blasted mortar and rusted chimney caps appear within just a few years because the marine layer and onshore salt air accelerate corrosion, making annual inspections critical even when fireplaces go unused for multiple seasons. We’ll tell you what’s cosmetic versus what’s a water-intrusion risk before you spend anything.
First-degree creosote is a loose, flaky soot that brushes off during a standard sweep. Third-degree creosote is a hardened, tar-like glaze that requires mechanical removal and can’t be brushed away. In Manhattan Beach, fires burn infrequently and at lower temperatures on damp coastal evenings, which means first-degree creosote never gets a chance to burn off and can harden over time. If we find third-degree creosote, we’ll show you the camera footage and quote the removal separately before any work starts. Call (833) 467-7685 for a free estimate.
Yes, but for different reasons. Gas inserts don’t produce creosote, but they produce acidic condensation that corrodes flue liners and firebox components faster in Manhattan Beach’s salt air. Factory-built fireplaces in new custom builds still need annual inspections, especially after Santa Ana wind events drop debris onto caps and roofs. These inspections take less time than a full masonry sweep, but skipping them entirely is how small rust or venting problems become liner replacements.
Yes. A lot of Manhattan Beach homes, especially in the Sand Section, have narrow side yards, walk-street access only, or roofs with steep pitches. Our teams carry the right ladders and safety gear for that work, and we’ve done enough walk-street jobs that we know what to expect. On a walk-street property in the Sand Section, our tech found a rusted damper and a bird nest blocking the flue of a masonry fireplace that hadn’t been burned in two years. We removed the nest, installed a new stainless cap, and swept first-degree creosote from the smoke chamber before the homeowner’s first winter fire. If your lot is tricky, tell us when you call and we’ll plan for it.
Call Ontario Chimney for Your Manhattan Beach Chimney Sweep
If your chimney hasn’t been looked at in a year or more, the ocean has been working on it anyway. Call (833) 467-7685 for a free estimate on a chimney sweep, inspection, or repair in Manhattan Beach. We’ll show you what’s inside your flue before we recommend anything, and we won’t sell you work you don’t need. Al Vickers and the team at Ontario Chimney serve homes from the Sand Section to the Tree Section and across the 90266 and 90267 zip codes.
Written by Al Vickers, Owner at Ontario Chimney, serving Manhattan Beach and the South Bay with chimney, venting, and dryer-vent safety services.