Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Coronado
Dryer vent cleaning in Coronado typically costs $129 – $249 for a standard single-family home, depending on vent run length and how long it’s been since the last cleaning. Most jobs in the 92118 and 92178 zip codes take 45 – 90 minutes when the vent termination is accessible. If you live near Orange Avenue, the Hotel del Coronado, or anywhere on the island, call (833) 467-7685 and we’ll give you a straight answer before you book.
We know Coronado’s housing stock because we’ve worked on it for years. Those 1920s Spanish Eclectic homes and Victorian beach cottages weren’t built with modern dryer venting in mind, and the salt-laden marine layer does things to metal components that inland San Diego homeowners rarely see. Our Dryer Vent Cleaning team handles the lint removal, the corrosion checks, and the camera inspection in one visit, so you’re not guessing about what’s actually inside your vent run.
Why Ontario Chimney Is Coronado’s Preferred Dryer Vent Cleaning Company
We built our reputation in Coronado on one thing: showing homeowners exactly what we found before recommending any work. No camera footage, no repair suggestion. That matters here because Coronado’s salt air corrodes vent components in ways that look alarming on the surface but are often simple fixes once you can see the full picture. Homeowners around the Hotel del Coronado and the older streets off Orange Avenue have told us the same thing: other companies quoted liner replacements or major repairs over the phone, and we showed up, put a camera in the vent, and proved the problem was a $40 flapper, not a $2,000 reline.
Ontario Chimney is run by Al Vickers, and that name is on every job we do in Coronado. Al started this company around a straightforward principle: dryer vents are a fire-safety component, not a convenience, and they deserve the same professional-grade materials and attention as a chimney flue. That’s why we service what we install, use components from Copperfield and DuraFlex, and never treat Coronado dryer vent cleaning as a side hustle. It’s a core service, staffed by technicians who understand coastal corrosion, older housing stock, and the difference between a lint clog and a failed vent hood.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Dryer Vent Cleaning Services in Coronado
Dryer Vent Cleaning
A standard dryer vent cleaning in Coronado runs $129 – $189 for a single-story home with an exterior wall termination. We run a rotary brush and HEPA-filtered vacuum through the full run from dryer to exterior hood, then verify airflow with a digital anemometer so you have a before-and-after measurement, not just a “looks good” wave. Homes near the water often have salt-caked lint that’s denser than inland deposits, which is why we don’t shortcut the process with a leaf blower or a shop vac strapped to the wall.
Dryer Vent Inspection
Camera inspection is $89 when booked as a standalone service, and it’s included free with a full cleaning. We run a high-resolution push camera through the entire vent run and show you what we see in real time on our tablet. This is the single most important service for Coronado homeowners with older homes, because you can’t spot a cracked clay tile liner, a disconnected joint inside a wall, or a rusted-through metal hood without putting eyes on it. You get a written report with still photos, which is often what insurance companies and landlords want to see.
Dryer Vent Repair
When the camera reveals a problem, repairs in Coronado typically run $85 – $220 for component replacements like flappers, hoods, and exterior terminations, while full vent run replacement in an older home can reach $350 – $650 depending on accessibility and whether we’re working through a repurposed chimney chase. We stock corrosion-resistant hoods and flappers on our trucks because we know salt air turns standard hardware-store components into rusted junk within two seasons. If a repair can wait safely, we’ll say so. If it can’t, we’ll show you why on the camera before we touch anything.
Dryer Vent Rerouting
Some Coronado homes from the 1920s and 1930s have dryer vents that terminate under the house, into the garage, or through an old chimney that was never designed for modern appliance exhaust. Rerouting a vent to code in Coronado generally runs $400 – $900 depending on wall construction and run length. We use rigid smooth-wall metal duct, never corrugated flex where it’s hidden inside a wall, and we’ll explain the difference in airflow resistance if you ask. This is the difference between a vent that works and one that quietly fills with lint behind the drywall.
Trusted Brands We Service in Coronado
When we replace a dryer vent component in Coronado, we install materials that hold up to salt fog and marine air, not whatever’s on sale at the hardware store. We use Copperfield vent hoods with painted or stainless finishes designed for coastal exposure, and where the job calls for flexible connector sections, we use DuraFlex components that are the same ones specified by professional chimney and venting contractors. HeatShield ceramic resurfacing comes into play when a homeowner has an old masonry chimney being used as a vent chase and the clay tile liner has started to spall or crack. These are professional-grade materials with manufacturer specifications that make sense for Coronado’s environment. We keep the common sizes on our trucks, which means most repairs happen on the first visit.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Coronado Homes
- Salt-air corrosion of exterior vent hoods and flappers. The marine layer that rolls over the island every morning carries salt, and it settles on everything metal. Standard steel hoods and spring-loaded flappers rust and seize within a few seasons, sometimes leaving the flapper stuck open so damp air pours back into the vent run and the laundry room.
- Pinhole leaks in metal vent runs. This one catches people off guard. A galvanized vent pipe that would last twenty years in La Mesa can develop rust perforations within five or six years less than half a mile from the beach. Lint catches on the rough spots inside, and the vent slowly loses draw. Camera inspection shows it immediately.
- Older homes with clay tile flues repurposed for dryer exhaust. A gas or electric dryer needs a dedicated 4-inch metal vent, but we frequently find mid-century Coronado homes where a builder or handyman routed the dryer exhaust through an old masonry flue. Cracked clay tiles leak lint into the chimney structure, and without a camera you will never know it’s happening.
- Bird and pest intrusion around termination points. The older streets near the Hotel del Coronado and along the Orange Avenue corridor often have vent terminations at roofline level, and gulls and pigeons treat them like a ledge. Feathers, nesting material, and droppings pack into the vent within weeks during nesting season. A basic hood with a flap is not enough; rust-resistant grates and proper sealing are what actually keep them out.
Pricing for Dryer Vent Cleaning in Coronado, CA
Here’s what you should expect to pay in Coronado for dryer vent work, based on what we see across the island:
- Standard dryer vent cleaning, single-story: $129 – $189
- Standard dryer vent cleaning, two-story or roof termination: $175 – $249
- Camera inspection only (without cleaning): $89
- Flapper or hood replacement: $85 – $220
- Full vent run replacement: $350 – $650
- Vent rerouting to meet code: $400 – $900
What moves the price is run length, roof access, and how long it’s been since the vent was touched. A 30-year-old home near the Hotel del Coronado with a 25-foot run that’s never been cleaned will take longer than a 10-foot direct vent on a mid-century ranch in the 92118 zip. We give you a flat price before we begin, and the camera inspection is included with every cleaning. Call (833) 467-7685 for an exact quote. Estimates are free, and we’ll answer your questions without a hard sell.
We Also Serve Cities Near Coronado
If you own a rental property or manage units across the South Bay, our Dryer Vent Cleaning team covers National City, San Diego, Imperial Beach, and Bonita with the same camera-verified process and flat pricing. Coronado will always be where our coastal corrosion expertise runs deepest, but the standards travel. One call to (833) 467-7685 handles multiple addresses.
Serving Coronado, CA - Our Local Coverage Area
We serve Coronado and nearby communities. Also see Gelco service in Coronado. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Coronado
Every 12 months is the correct interval for most Coronado homes, and some within half a mile of the beach should do it every 9 months. The salt-laden marine layer coats lint with a fine mineral film that makes it denser and more adhesive than inland lint, so buildup happens faster even with moderate dryer use. If your vent termination is at roofline or you dry bulky items like beach towels and bedding regularly, lean toward the 9-month schedule. Call (833) 467-7685 if you’re not sure when your vent was last cleaned; we’ll check it and tell you honestly whether it needs work now or can wait.
Yes, and we will not recommend a repair you have not seen on camera first. Every cleaning in Coronado includes a high-resolution camera pass through the full vent run, with the footage shown to you in real time and still photos included in your written report. If a flapper is corroded, a joint has separated, or a clay tile liner is leaking lint, you will see it with your own eyes before any money changes hands. This is the fastest way to know you’re not being upsold on work that is not needed.
Sometimes, but it depends entirely on what’s inside, and we see both good and bad versions of this in Coronado’s older homes. The safe installation is a dedicated 4-inch metal duct routed through the chimney chase, not exhausting into the masonry flue itself; the unsafe installation is a dryer vented directly into a clay tile flue that was built for fireplace exhaust, which can leak lint into the chimney structure and create a fire hazard that is invisible without a camera. If your home predates the 1950s and the vent path goes into a chimney, book a camera inspection before you run another load. Call (833) 467-7685 and we’ll map the run and show you exactly what you have.
Rust spots on a dryer vent almost always trace back to salt air corrosion, and in Coronado this is one of the most common findings we see, especially on homes within a few blocks of the beach. The marine layer deposits salt particles on metal surfaces, and when moisture condenses on the vent hood or flapper, the salt accelerates oxidation far faster than you would see five miles inland. Small rust spots are a warning sign: pinhole leaks and seized flappers follow, and once a flapper fails, damp salt-laden air gets drawn back into the vent and the wall cavity. Replacement with a corrosion-resistant hood is usually an $85 – $220 fix, which is a fraction of what a full duct replacement costs if the problem is left alone.
Yes, we clean and repair dryer vents throughout the Hotel del Coronado area and the surrounding streets, including the older cottages and Spanish Eclectic homes that make up the historic core of Coronado. Those homes often have original vent terminations that have been exposed to salt air for decades, and we know how to work on them without damaging the period exterior details. Same-week appointments are typically available for the 92118 zip code, and we’ll give you a specific arrival window when you book. Call (833) 467-7685 to schedule.
One thing we see in Coronado that inland San Diego rarely experiences: the salt-laden marine layer corrodes metal dryer vent components in a way that mimics general wear, so a vent hood that looks rusty from the outside is often on the verge of pinhole leaks or flapper failure internally. On a 1920s Spanish Eclectic home off Orange Avenue, our technician found a dryer vent run that had been retrofitted through an old chimney chase using flexible DuraFlex duct. The metal hood on the exterior wall was so salt-corroded that the flapper had seized, gull feathers had clogged the termination, and airflow was reduced by more than 60 percent. We replaced the hood with a corrosion-resistant Copperfield model, cleared the vent, and restored proper draw. The homeowner had been told by another company that the entire duct run needed replacement. It didn’t. The camera told the real story, and that’s the difference between a company that cleans vents and a company that understands how coastal air attacks them.
If your dryer is taking longer than it used to, or the laundry room feels damp after a cycle, or you can see rust on the outside vent hood, call (833) 467-7685. We’ll set a flat price, put a camera in the vent, and show you exactly what’s going on. No scare tactics, no invented emergencies. Just the facts, and a fix that works.
Written by Al Vickers, Owner at Ontario Chimney, serving Coronado’s dryer vent and chimney needs.