Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Glendale
Dryer vent cleaning in Glendale typically runs $129 – $219 for a standard single-family home, and we’ll usually have a technician at your door within 2 – 4 business days. We’re not an emergency-weather boiler room; we book carefully, show up on time, and do the job properly the first visit. If your laundry room smells musty, your dryer takes two cycles to dry a load, or the vent flap outside isn’t opening when the machine runs, that’s a clog building. Call (833) 467-7685 and we’ll schedule a sweep with camera proof before you spend a dollar on anything else.
Why Ontario Chimney Is Glendale’s Preferred Dryer Vent Cleaning Company
Ontario Chimney has been working inside Glendale homes long enough to know that a 1920s bungalow on East Broadway vents differently than a 2005 hillside rebuild off Cañada Boulevard. Our techs know the difference between a clay-tile flue that predates the Fair Labor Standards Act and a listed prefab chimney that was craned into place last decade. That matters when a dryer vent shares a chase with either one. We’re not a pressure-wash crew that added duct cleaning to a menu. Dryer vent cleaning is a core service for us, handled by the same trained technicians who sweep chimneys and repair flue liners all week in Glendale and the surrounding foothill neighborhoods.
We show up with inspection cameras, not just brushes. Al Vickers, our owner, has built the company around one rule: the homeowner sees what we see. If we find a cracked flue tile behind the dryer vent run, you’ll watch the camera glide past it on our screen before anyone quotes a repair. Nothing gets “recommended” without footage. That’s how we’ve earned repeat business from homeowners in the 91201, 91203, and 91207 ZIP codes who’ve been burned before by upsell artists. To schedule service anywhere in Glendale, call (833) 467-7685.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Dryer Vent Cleaning Services in Glendale
Standard Dryer Vent Sweep
A full-length brush and vacuum pass through the dryer duct, from the appliance connection to the exterior termination. For most Glendale homes with a 5 – 15 foot straight or gently offset run, this takes under an hour. We clean the lint trap housing, inspect the foil or rigid duct for kinks, test airflow at the exterior vent, and photograph the before and after. In older Glendale homes where the vent runs through a converted chimney chase, we’re extra careful at every joint. Rigid metal duct in a 1926 Spanish-style house is not something you want to yank apart with a spinning brush head.
Camera Inspection of the Vent Run
Every dryer vent cleaning we do in Glendale includes a camera inspection. We snake a small-diameter camera through the entire duct and show you the screen. If we see packed lint at a 90-degree elbow behind a laundry room wall, you’ll know exactly where it is. If we see moisture staining or a separated joint inside a chase shared with a cracked flue, you’ll see that too. This is how we separate a simple cleaning from an actual defect. It’s also how we document the work for landlords and property managers in Glendale who need a record for tenants or insurance.
Dryer Vent Re-routing Off an Old Chimney Chase
In pre-1950 Glendale homes, especially the bungalow flats of 91201 and 91203, it’s common to find a dryer vent discharging into the same masonry chimney that once served a fireplace or floor furnace. That was never code-legal and it’s never safe. Lint is fuel, and a clay-tile flue with hairline cracks gives that lint somewhere to accumulate against hot, spalling mortar. We run a camera first. If the chase is structurally sound and we can drop a listed liner through it, we’ll quote that. If not, we’ll route the dryer outside through a proper wall or roof cap. No liner sold off a glance. No scare tactics.
Liner Installation for Dryer Exhaust
When a dryer must continue venting through an existing masonry chase, we install a dedicated DuraFlex stainless liner sized for appliance exhaust only. This isn’t a fireplace flue liner doing double duty. It’s a separate, continuous metal pipe that carries warm, lint-laden air from your dryer to the outside without touching the inside of the old chimney. In Glendale’s hillside neighborhoods like 91207 and 91208, where some homes have prefab fireplace chases to work around, we’ll spec the liner run to the actual geometry we saw on camera. No surprises when the install happens because we’ve already seen the entire path.
Trusted Brands We Service in Glendale
We work with a curated set of professional-grade components, not hardware-store substitutes. That means DuraFlex liners for dryer exhaust re-routing, Copperfield and Olympia Chimney distribution for caps and termination kits, and Famco for damper and vent components where needed. Because we keep common termination caps, flexible aluminum, and rigid duct fittings stocked on our trucks, most Glendale dryer vent jobs finish in a single visit. We don’t run out to a big-box store for a $4 plastic flap because we don’t install $4 plastic flaps. The parts we use are the same ones certified chimney professionals specify, and they’re on the truck when we pull up in front of your Glendale home.
Common Dryer Vent Cleaning Problems We See in Glendale Homes
- Dryer vents discharging into old chimney chases. In the 1910s – 1930s bungalows of 91201 and 91203, someone fifty years ago often tied the dryer into a decommissioned fireplace flue. Lint accumulates against cracked clay tile and crumbling mortar. What looked like a simple vent cleaning is actually a fire hazard in the making.
- Hairline flue-tile fractures after small earthquakes. Glendale sits on the Raymond Fault zone. After any magnitude-3-plus tremor, we get calls from homeowners with pre-1950 masonry. The vent itself may be fine, but the chase it passes through is suddenly shedding mortar fragments. We camera-inspect both.
- Third-degree creosote glaze backing up into the vent run. Glendale’s hot, dry summers bake creosote inside any shared chimney. By the first fall fire, that glaze is hard as glass. A brush alone won’t remove it, and if the dryer vent passes nearby, it bakes lint too. This is a classic “silent” problem that only shows up on camera.
- Roof debris from the Verdugo Mountains clogging exterior terminations. Santa Ana wind events push ash, dust, and fine debris across Glendale roofs all fall. Dryer vent flaps get stuck open or wedged shut. We find dead moths, soot, and even small nest material in exterior terminations more often than homeowners expect.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Glendale, CA
A standard dryer vent sweep for a single-family home in Glendale runs $129 – $219. That includes the brush and vacuum pass, airflow test, exterior termination check, and camera footage of the full run. Longer duct runs (20 feet or more, common in hillside split-levels) add $40 – $75. A camera-only inspection, if you suspect a problem but want documentation first, runs $89 – $129 and is credited toward any repair we complete. If we find a vent tied into a cracked chimney chase and need to install a dedicated DuraFlex liner, total cost depends on the run length and access, but a typical Glendale re-route falls between $650 and $1,400. You’ll see the camera footage and get a flat price before the work starts. Call (833) 467-7685 for a free estimate, and we’ll walk you through what’s involved over the phone.
We Also Serve Cities Near Glendale
Our trucks work throughout the San Fernando and San Gabriel foothills. If you’re in Burbank near the hillside streets off Glenoaks, La Cañada Flintridge below Descanso Gardens, Echo Park in the older craftsman pockets, or Silver Lake around the reservoir, we handle those routes weekly. The same camera-first, brand-name-materials approach applies everywhere we go. If you’re uncertain whether we cover your street, check our full Dryer Vent Cleaning service area or call (833) 467-7685.
Serving Glendale, CA - Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Glendale
Yes, in most cases. We use a variable-speed brush system and camera-assisted guidance to avoid hammering the inside of an old clay flue. Before we run anything through, we camera-inspect to see if the vent even touches the flue. If the dryer vent runs independently of the chimney, we’re cleaning a metal duct, not a clay tile. If it does share a chase, we’ll show you the footage and discuss options before spinning any brush. In a 1920s Glendale bungalow, we’re always cautious around original mortar. Call (833) 467-7685 and we’ll talk through your home’s specific layout.
You’ll typically notice three things: your laundry room gets unusually warm and humid when the dryer runs, you find lint accumulating near the fireplace cleanout or hearth, and your exterior wall has no visible vent flap near the dryer location. In older Glendale homes with masonry chimneys, the vent sometimes disappears into the wall and never comes out. We verify with a camera. If the duct enters the chimney chase, that’s a re-route situation, and you’ll see the evidence on our screen before we quote a dollar.
If you felt the shake in Glendale and your home was built before 1950, yes, it’s worth a camera inspection. In the 91201 and 91203 flats, the same 1920s brick chimneys repeatedly show hairline flue-tile fractures after any magnitude-3-plus tremor. A routine dryer vent cleaning might miss those cracks because the brush travels through the duct, not the surrounding chase. We camera-inspect the entire chase and vent run together. If we find separation or spalling, we’ll show you the footage and recommend whether it needs repair now or can be monitored.
Third-degree creosote is a hardened, glazed tar deposit that forms inside wood-burning flues after repeated high-heat fires and long dormant periods. In Glendale, our hot summers dry creosote into a dense, glassy coating that resists brushing. If your dryer vent shares a chase with an active or recently-used fireplace flue, radiant heat can bake lint in the adjacent vent as well. That creates a double fuel load in one tight space. We check for this on camera during every Glendale dryer vent sweep, especially in older homes where the chimney does double duty.
Yes. We work regularly in Glendale’s hillside neighborhoods, including 91207 and 91208, where many homes were rebuilt or added onto with prefab fireplace systems. Those factory chimney chases often run adjacent to laundry areas and can have tight clearances. We’ll clean the dryer vent independently, inspect the prefab chase for any shared penetration, and document everything on camera. The approach is the same as the flats, but we’re aware of the tighter framing and steeper roof access in those ZIP codes. Call (833) 467-7685 and we’ll schedule a time that works for your street’s access.
One Company From Inspection to Repair
Most dryer vent cleaning companies in Glendale can run a brush through a duct. What they can’t do is follow the problem through a cracked chimney chase, install a listed DuraFlex liner, rebuild a damaged crown, and hand you camera footage of every step. We can. We’re a full-service chimney and venting company, not a duct-cleaning franchise. That means when we find something wrong on your Glendale property, we don’t refer you to someone else and wish you luck. We quote the fix, get your approval, and handle it with the same crew. It’s less coordination for you and fewer chances for a problem to get lost between two companies. Call (833) 467-7685 for a free estimate, and we’ll tell you exactly what we’d do at your Glendale home.
Written by Al Vickers, Owner at Ontario Chimney, serving Glendale and the surrounding foothill communities.