Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Temple City
Dryer vent cleaning in Temple City typically costs $149 – $249 for a standard single-story ranch home, and most jobs take under two hours. The work matters more here than in newer tracts: Temple City’s mid-century homes often route dryer exhaust through hidden paths that a quick exterior brush never touches. We’re Ontario Chimney, and our Dryer Vent Cleaning team knows exactly where those paths hide. Call (833) 467-7685 for a free estimate, and we’ll tell you what we found, show you the evidence, and give you options.
Why Ontario Chimney Is Temple City’s Preferred Dryer Vent Cleaning Company
Temple City homeowners deal with a specific kind of house: 1940s – 1970s single-story ranch builds along numbered streets off Las Tunas Drive and Rosemead Boulevard, many with original clay tile chimneys and dryer vents that were installed decades before anyone thought about lint fires. We’ve worked enough of these homes to know what’s behind the wall before we open it. When a homeowner in the 91780 ZIP tells us the dryer takes three cycles to finish a load, we already suspect a crushed transition duct or a blocked exterior damper, because that’s what these houses do.
Al Vickers has built this company around one idea: a homeowner should never pay for a repair they haven’t seen with their own eyes. That matters in Temple City, where the fireplace population is mostly decorative-but-original and the dryer vent population is mostly ignored. We run a camera through every vent we clean and hand you the footage. If we recommend a repair, you’ll see the blockage or the crushed duct on screen first. No vague warnings, no pressure.
Response time to Temple City neighborhoods is typically same-week, and because we’re based nearby in Ontario, we don’t treat this as a distant service call. We’re on the ground here often enough to know that homes north of Live Oak Avenue and south of the 210 sit on lots small enough that dryer vents often terminate in odd places: under the house, into the chimney chase, or through a wall with a damper that hasn’t opened in a decade.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Dryer Vent Cleaning Services in Temple City
Dryer Vent Cleaning with Camera Inspection
This is our standard service for Temple City homes, and we won’t clean without it. The camera shows us the full vent path, from the dryer connection to the exterior termination. In these older ranch homes, that path is rarely a straight shot. We’ve documented vents that snake under floor joists, vents that merge with the chimney chase, and vents that dead-end into wall cavities because a previous remodel buried the original termination. The camera tells us what the exterior brush can’t, and it tells you too, because you get the footage. Standard pricing in Temple City runs $149 – $249 depending on vent length and access.
Dryer Vent Cap and Damper Inspection
In a dry San Gabriel Valley climate, the exterior cap is where Temple City vents fail most often. Lint packs against the damper flaps, birds and squirrels build nests behind them during the long dry season, and the hardware itself corrodes. When the damper can’t open, moist air backs up into the wall cavity instead of exiting the house. That’s the dampness smell, and it’s also how mold starts inside a wall. We inspect every cap and damper as part of our standard cleaning, and we replace worn or broken hardware using Gelco repair in Temple City with Famco components, brands specified by chimney and venting professionals rather than the hardware-store alternatives.
Dryer Vent Transition Duct Replacement
The flexible duct behind the dryer is the most abused piece of venting in a Temple City laundry room. It gets crushed when someone shoves the machine back against the wall, kinked when the dryer shifts during use, and torn when it’s old foil-style material. On a numbered street off Las Tunas Drive, we cleaned a dryer vent in a 1950s ranch where the homeowner complained of dampness in the laundry area. Our tech found the flexible transition duct crushed behind the dryer and a birds’ nest blocking the exterior damper. After removing both, airflow doubled and the laundry dried in one cycle instead of three. That one fix costs $49 – $89 including the replacement duct, and it solves more Temple City dryer complaints than any other single repair.
Post-Remodel Dryer Vent Assessment
Temple City’s older homes get cosmetically remodeled often: kitchens and laundry rooms updated, fireplaces refaced, walls opened and closed. What rarely gets touched is the venting inside those walls. We regularly find dryer vents that were rerouted improperly during a remodel, vents buried behind drywall, and vents that now terminate under a new roof overhang. If you’ve bought a remodeled Temple City home, the previous owner’s contractor may not have thought about the dryer vent, and nobody inspects it. We do. A post-remodel assessment runs $99 and tells you whether the vent is actually doing its job.
Trusted Brands We Service in Temple City
We don’t install whatever’s cheapest at the supply house. Our vent caps, dampers, and transition duct work use Gelco and Famco components because they’re what certified chimney professionals specify. When a Temple City home needs relining or chimney chase repairs that affect the dryer vent path, we use DuraFlex stainless steel liner systems, the same material chimney professionals trust for offset flues that rigid liners can’t navigate. And our parts come through Copperfield and Olympia Chimney, the two largest professional chimney supply distributors in the trade. That means when we replace a damper or cap on a Temple City home, we’re installing a part that was built to last, not something off a big-box shelf.
Common Dryer Vent Cleaning Problems We See in Temple City Homes
- Vents that terminate under the house instead of through the roof or wall. In Temple City’s mid-century ranch homes, it’s not unusual for the dryer vent to exit through the crawl space or into the chimney chase rather than a dedicated wall or roof penetration. Lint accumulates in hidden cavities that a standard exterior-only cleaning never reaches, and the first sign is often a mold smell in the laundry room or a dryer that runs longer every month.
- Exterior dampers clogged with lint and nesting material. The long dry season in the San Gabriel Valley is prime nesting time for birds and squirrels. Unprotected vent caps on Temple City homes attract them, and the result is a damper that can’t open. Moist air backs into the wall cavity, lint backs up behind the damper, and the dryer works harder every cycle. We see this on original 1940s – 1960s homes that have never had their caps replaced.
- Crushed or kinked transition ducts behind the dryer. Temple City laundry rooms are often small, built for the compact machines of the postwar era. A modern full-size dryer in a space that was designed for something smaller means the flexible duct gets bent, crushed, and kinked whenever the machine moves, which is every load. Restricted airflow is the single most common cause of long drying times we diagnose in this city.
- Chimney-vented dryers with deteriorating clay tile flues. When a Temple City dryer vent merges with the chimney chase, the condition of the flue becomes a dryer vent problem. Original clay tile liners in 50 – 70-year-old homes crack from decades of settling and the region’s mild seismic activity. Those cracks let lint and humid exhaust into wall cavities. It’s a combination that requires chimney knowledge, not just a vent brush, and it’s why Temple City homeowners often need both services from the same company.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Temple City, CA
Here’s what you can expect to pay in Temple City, and what drives the number.
| Service | Temple City Price Range |
|---|---|
| Standard dryer vent cleaning with camera inspection | $149 – $249 |
| Dryer vent cap and damper inspection (included with cleaning) | Included |
| Dryer vent cap or damper replacement | $89 – $179 installed |
| Transition duct replacement (flexible duct behind dryer) | $49 – $89 installed |
| Post-remodel dryer vent assessment | $99 |
Vent length, access, and whether the vent runs through the chimney chase all affect the final price, but you’ll have a confirmed quote before we start. We don’t do per-foot surprises. Call (833) 467-7685 for an exact quote on your Temple City home, and if the camera shows the vent is clear, we’ll tell you that too, and you pay nothing for advice you didn’t need.
We Also Serve Cities Near Temple City
Our service area includes the neighborhoods and cities around Dryer Vent Cleaning in Temple City as well as North El Monte, Rosemead, San Gabriel, and Arcadia. If your home sits near any of these surrounding communities, call and we’ll schedule the same camera-inspected vent cleaning we offer Temple City residents. The truck is already in the area almost every week.
Serving Temple City, CA - Our Local Coverage Area
We serve Temple City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Temple City
Every 12 months is the right interval for most Temple City homes, and here’s why: the semi-arid San Gabriel Valley climate doesn’t add rain to your vent the way a humid coastal area might, but it does add dust. Dry air means fine particulate moves through the system constantly, and it packs lint inside the vent faster than you’d expect. If your dryer vent terminates under the house or merges with the chimney chase, annual cleaning with camera verification is the minimum. Homes with multiple adults, pets, or heavy laundry use may need cleaning every 8 – 10 months. Call (833) 467-7685 to schedule, and we’ll tell you what we found.
Yes, and in Temple City it’s the one question we insist every homeowner ask. Every cleaning includes camera footage of the full vent path, and if we recommend a repair, we’ll show you the exact blockage or damage on that footage before you approve anything. We’ve seen too many Temple City homeowners get sold liner replacements or wall rebuilds based on a technician’s word alone. Don’t accept that. We’ll hand you the video and let you see the problem yourself. Al Vickers built this policy into the company, and it’s not optional for our techs.
It’s more common here than in almost any newer Southern California suburb, because Temple City’s housing stock is dominated by 1940s – 1970s single-story ranch homes. In many of these original builds, the dryer vent was routed into the chimney chase rather than through a dedicated wall or roof penetration. It’s a design that made sense with the appliances of the era, but it creates problems now: the clay tile flue in those chimneys is 50 – 70 years old, often cracked from settling and seismic movement, and combined dryer and fireplace exhaust can make both systems work worse. When we clean a chimney-vented dryer in Temple City, we inspect the flue condition as part of the service because they’re the same system.
Clothes taking more than one cycle to dry is the most common symptom we hear from Temple City homeowners. Other signs: a musty or burning smell when the dryer runs, the dryer exterior feels hot to the touch, the laundry room is noticeably humid during operation, or the exterior damper doesn’t open when the dryer is on. If you see any of these, call us at (833) 467-7685 before running another load. A blocked vent isn’t a slow, harmless decline. The CPSC and NFPA report that dryer vent fires start when lint buildup restricts airflow and heat can’t escape. In Temple City’s dry air, that risk is higher, not lower.
Yes, and in Temple City we recommend it more often than in newer areas. The original caps and dampers on 1950s and 1960s ranch homes are frequently rusted shut, broken, or missing entirely after decades of Southern California sun and nesting pressure. We replace them with Gelco and Famco dampers and caps, the same professional-grade brands chimney contractors specify, and we install them with the bird screens that keep the long dry season’s nesting species out. Replacement runs $89 – $179 installed depending on the cap type and vent location. Call for a free estimate and we’ll inspect yours while we’re cleaning.
Schedule Your Temple City Dryer Vent Cleaning
If you live in Temple City and haven’t had your dryer vent cleaned in the last year, or you don’t know where your vent even terminates, that’s the starting point. We’ll run a camera through the full path, show you what we found, and only recommend work you can see with your own eyes. One company from inspection to repair, using professional-grade materials, not hardware-store substitutes. Call (833) 467-7685 for a free estimate from Ontario Chimney, serving Temple City and the surrounding San Gabriel Valley. We’ll be straight with you about what your vent needs, and whether it can wait.
Written by Al Vickers, Owner at Ontario Chimney, serving Temple City and the San Gabriel Valley with dryer vent cleaning, chimney sweeping, and chimney repair.