Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Colton, CA
Chimney repair in Colton usually means dealing with a fireplace that hasn’t been lit in years. SCAQMD no-burn days keep wood fires dark for long stretches, and during that downtime, moisture works into cracked crowns and aging clay tile liners. What starts as a small spall becomes a safety problem the next time someone actually wants a fire. We see it constantly in the 1950s and 1960s tract homes along La Cadena and Valley Boulevard. Ontario Chimney has served Colton since 2014. Call (833) 467-7685 when you’re ready to know what’s actually going on inside your flue.
Why Colton Homes Are Different
Colton sits in a part of the Inland Empire where the air quality rules shape how chimneys age. Wood-burning restrictions mean fireplaces in ZIP code 92324 often go two or three seasons without use. That changes the kind of damage we find. Instead of heavy creosote from frequent fires, we find bird nests, raccoon debris, and flue tile that has spalled from years of inland heat cycling. The original clay liners in mid-century stucco tract homes and older bungalows near the historic core are especially prone to cracking when Santa Ana winds drive temperature swings. A chimney that sits unused isn’t preserved. It’s slowly degrading in ways you can’t see from the living room.
The housing stock matters too. Many Colton homes from the 1950s through 1970s have single-story layouts with original masonry fireplaces. That era of construction used clay flue tiles that were never meant to last sixty years in this climate. Dry summers pull moisture out of mortar joints, and when winter rain finally comes, water penetrates the now-porous crown and runs down inside the flue. By the time a homeowner sees staining on the ceiling or hears birds in the chimney, the deterioration has been underway for years. This is why our Colton work leans heavily toward inspection and repair, not just sweeping.
Styles & brands we work with
Our Main Colton Services
Two services account for most of the calls we take from Colton homeowners. Each one is described below, with its own dedicated page if you want the full depth.
Chimney Sweep in Colton
A Chimney Sweep in Colton call usually starts with birds. The fireplace hasn’t been used since the last no-burn season, and now there’s scratching or chirping from behind the damper. We remove the nest, clear debris, and run a camera through the flue to check liner condition. What had been a dormant fireplace becomes safe to use again, typically in a single visit. Flat-price sweep, and any findings are shown on camera. If a fire is in your winter plans, this is the first step.
Dryer Vent Cleaning in Colton
Dryer Vent Cleaning in Colton is a standalone fire-safety service, not an add-on. Lint accumulation in the vent run is a leading cause of house fires, and Colton’s hot, dry summers make any lint blockage a serious concern. We clean the full vent from the dryer to the exterior termination, check airflow, and show you before-and-after photos. One service call, one clear report. Landlords with multiple units in Colton schedule this annually to keep documentation current.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Colton
Chimney repair in Colton is driven by the age of the housing and the way fireplaces sit unused. Mid-century brick fireplaces with original clay tile liners spall in the inland heat, and homeowners often discover the damage only after hearing birds, smelling dampness, or noticing efflorescence on the brick. The fix may be a new cap and crown, flashing repair, or a full Chimney Repair liner installation depending on what the camera shows. We never recommend work without showing you the evidence. In Colton, the most common repair calls are cap replacement, crown rebuilding, and liner installation in homes where the original clay has failed.
Chimney Cap Installation
Signs you need it
Birds, bats, or rodents inside the flue, or rainwater pooling in the firebox.
What it costs in Colton
New chimney cap installation in Colton typically runs $180 to $550 depending on the flue size and whether a custom stainless steel unit is required.
How we do it
We measure the flue, install a stainless steel cap sized to the existing tile or liner, and secure it for wind resistance during Santa Ana events.
Chimney Cap Replacement
Signs you need it
A rusted, bent, or missing cap that no longer keeps rain and animals out.
What it costs in Colton
Chimney cap replacement in Colton typically falls between $250 and $575, including removal of the old unit and watertight sealing.
How we do it
We remove the failed cap, inspect the flue beneath it for hidden water damage, then fit a new cap with a proper mechanical fastening or masonry anchor.
Chimney Liner Installation
Signs you need it
Cracked, spalled, or missing flue tiles found during a camera inspection, often in Colton homes built before 1970.
What it costs in Colton
Chimney liner installation in Colton ranges from $2,800 to $7,000 depending on flue length, diameter, and whether the original liner must be removed first.
How we do it
We run a camera to confirm sizing, then install a DuraFlex stainless steel liner sized exactly to the flue, a route that handles offset flues rigid liners cannot accommodate.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, or visible gaps where the chimney meets the roofline.
What it costs in Colton
Chimney flashing repair in Colton generally runs $300 to $750 depending on roof access and how much of the old flashing needs to be replaced.
How we do it
We cut out the failed flashing, install new step and counter flashing, and seal the transition with a professional-grade sealant rated for inland heat and UV exposure.
Chimney Crown Repair
Signs you need it
Cracked, spalling, or crumbling concrete on the top of the chimney that lets water into the masonry.
What it costs in Colton
Chimney crown repair in Colton typically costs $400 to $1,100 depending on the amount of surface area and whether a full rebuild is required.
How we do it
We grind out the damaged crown, form and pour a new one with a proper drip edge, and slope it to shed water away from the flue.
What Chimney Repair Costs in Colton
| Item | Typical range in Colton |
|---|---|
| Chimney cap installation | $180 – $550 |
| Chimney cap replacement | $250 – $575 |
| Chimney flashing repair | $300 – $750 |
What pushes a Colton job higher is usually the age of the original masonry. If a 1960s clay liner has failed, the job moves from a cap or crown repair into liner territory. If roof access is tight or the chimney sits on a steep pitch near the historic core, labor time increases. Everything is quoted upfront, and nothing is approved without your go-ahead after seeing the camera footage.
How much does a chimney liner replacement cost in Colton?
Replacement typically runs $2,800 to $7,000. The spread depends on flue length, whether the old clay tiles must be broken out, and whether a single-story or two-story roofline is involved. Call (833) 467-7685 for a fixed quote.
Can a cracked chimney crown wait until next season?
It can, briefly, but water intrusion accelerates in Colton’s winter rain cycle, and the damage worsens with every freeze-thaw or wet-dry cycle. If a camera inspection shows water already reaching the flue, waiting usually costs more. We’ll tell you plainly if it can wait, and show you why.
Brands We Service in Colton
We install and service our brands through a deliberately narrow range. DuraFlex stainless steel liners for relining work. HeatShield ceramic resurfacing as an alternative to full liner tear-out. Gelco caps and dampers where the originals have failed. We stock common components locally, so most Colton repairs don’t wait on shipping.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Colton, CA
| Service | Typical range in Colton |
|---|---|
| Chimney sweep | $159 – $269 |
| Dryer vent cleaning | $99 – $189 |
| Chimney cap installation | $180 – $550 |
| Chimney cap replacement | $250 – $575 |
| Chimney flashing repair | $300 – $750 |
| Chimney crown repair | $400 – $1,100 |
| Chimney liner installation | $2,800 – $7,000 |
| Masonry repair (firebox) | $350 – $1,500 |
| Damper replacement | $200 – $600 |
Prices in Colton run up when roof access is difficult, when a 1960s clay liner has failed and must be broken out, or when a home near the historic core has brickwork that requires careful matching. The flat-price quote you approve before we start is the price you pay. Estimate at the time of booking, no surprise add-ons after the camera goes in.
Neighborhoods We Serve in Colton
We work the full ZIP code 92324, from the mid-century tract homes west of the 215 up through the neighborhoods around Colton High School and the older streets near the historic core. Response time across Colton is typically within a few business days, depending on the season.
- La Cadena corridor
- Valley Boulevard area
- Historic core near downtown Colton
- Colton High School district
- West Colton tract homes
Service Area – Cities Near Colton
Our teams also cover the surrounding communities. Homeowners in Grand Terrace, CA call us for the same mid-century liner work we see in Colton. Highgrove, CA sits just north with similar housing age. Loma Linda, CA and Rubidoux, CA round out the east and west edges of our service area. If you’re in any of these cities, the same team, the same upfront pricing, and the same camera-verified reporting apply.
Serving Colton, CA — Our Local Coverage Area
We’re based in the Colton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Colton
Most cap, crown, flashing, and liner work does not require a city permit, though anything involving structural changes to the chase or firebox may. We handle the determination on a job-by-job basis and tell you before work starts if permitting is needed.
No-burn day rules restrict burning wood, not chimney service. We sweep and repair chimneys year-round in Colton, and in fact, the no-burn season is when many homeowners finally get around to having the dormant fireplace inspected.
Yes. Every inspection includes camera footage and a written report. Colton landlords and home sellers use these to document liner condition, cap integrity, and dryer vent cleanliness. Call (833) 467-7685 if you need a documented inspection before closing.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Colton Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Bethany Padgett"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Sarah Sullivan"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Adriana Morales