Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Murrieta, CA
Most Murrieta chimneys aren’t brick stacks. They’re factory-built metal flues tucked inside stucco chases on tract homes from the late 1980s through the 2000s, and that changes everything about how they need to be inspected, swept, and repaired. If your fireplace gets used hard for a few winter weeks then sits idle through the inland heat and Santa Ana winds, creosote buildup and critter problems show up differently here than they do a short drive west in San Diego. Ontario Chimney has served Murrieta since 2014, and we start with the same question on every call: what’s actually inside that chase? Call us at (833) 467-7685 and we’ll walk through what you’ve got.
Why Murrieta Homes Are Different
Walk through most of 92562 and 92563 and you’ll see the pattern fast. These are master-planned neighborhoods built between roughly 1988 and 2008, which means the fireplaces are almost always factory-built units vented through prefabricated metal flues. The chimney you see from the street is usually a framed chase wrapped in stucco, not a masonry structure. That’s a big deal for maintenance. A chase-mounted chimney still needs a rain cap, proper flashing where the stucco meets the chase top, and an intact flue liner inside, but the failure points are different from an older brick chimney in the downtown 92562 core.
Weather compounds it. Inland Riverside County runs hot and dry most of the year, with Santa Ana episodes in the fall that can push embers and debris across roofs. Fireplaces see concentrated use over maybe eight to twelve cool weeks, then nothing for months. That stop-start cycle lets creosote glaze harden in the flue, and the long idle stretch gives birds, rodents, and wasps time to move into any cap that isn’t sealed tight. We find more animal nests and downdraft complaints in Murrieta than we do in coastal areas where fireplaces run more evenly through the season.
Styles & brands we work with
Our Main Murrieta Services
The two calls we get most from Murrieta homeowners are chimney sweeping and dryer vent cleaning, and each has its own quirks here. Both start with a visual inspection, both end with a written report, and both are jobs you can book on the same call.
Chimney Sweep in Murrieta
A chimney sweep in Murrieta usually means pulling the cap off a prefab metal flue, running a rotary brush down the full length, and checking the chase top and flashing while we’re up there. Because so many Murrieta fireplaces sit idle most of the year, we’re also looking for evidence of nesting, rust at the flue joints, and creosote glaze that a standard brush won’t remove. If the chase is stucco, the flashing has to be checked carefully because tile and stucco joints crack in inland heat. Chimney Sweep in Murrieta is the service page with the full walkthrough, but the summary is this: if you haven’t had the flue looked at in two or more years, get it done before the next burn season.
Dryer Vent Cleaning in Murrieta
Dryer vents run through interior walls and attics here the same way flues do, and lint builds just like creosote: slowly, then all at once. Homes in the 92563 and 92564 subdivisions tend to have longer vent runs than older 92562 houses because the laundry rooms sit on interior walls, which means more distance for lint to accumulate and more resistance in the line. We clean the full run from dryer to termination point, check the exterior damper, and document everything with photos. Dryer Vent Cleaning in Murrieta covers the full scope. If your dryer has been running longer on a normal load, the vent is the first thing to check.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Murrieta
Chimney repair in Murrieta splits into two worlds: factory-built flues in stucco chases that need caps, flashing, and liner work, and older masonry remnants in the downtown 92562 core that may need crowns rebuilt or brick repointed. The inland heat and dry Santa Ana winds are rough on metal caps and chase flashing, and many homes we visit haven’t had the chase top inspected since the house was built. When we do find damage, we show you photos before we recommend anything. Our repair work runs from cap and flashing fixes through full relining, and the full service line lives on our Chimney Repair hub page.
Chimney Cap Installation
Signs you need it
You can see an open or missing flue pipe from the ground, or you’ve found leaves, twigs, or nesting material inside the firebox or on the damper.
What it costs in Murrieta
Chimney cap installation in Murrieta typically runs $250 to $550 depending on the flue size and whether the cap can be mounted straight to the pipe or needs a custom adapter for a stucco chase top.
How we do it
We measure the flue opening, bring a stainless cap that matches the chase profile, secure it with mechanical fasteners, and photograph the finished install from the roof and the ground.
Chimney Flashing Repair
Signs you need it
You have a water stain on the ceiling near the fireplace chase, peeling paint at the chase top, or visible gaps where the metal flashing meets the stucco or roofing material.
What it costs in Murrieta
Flashing repair around a chase or chimney in Murrieta usually falls between $300 and $700, depending on whether we’re resealing an existing flashing or cutting and installing new metal.
How we do it
We pull the old flashing, inspect the chase framing for rot, install new step and counter flashing, seal with a high-grade exterior sealant, and document the repair with before and after photos.
Chimney Crown Repair
Signs you need it
The masonry crown on an older Murrieta chimney has visible cracks, spalling, or standing water pooling on top after rain.
What it costs in Murrieta
Crown repair on a masonry chimney in Murrieta generally runs $400 to $1,100 depending on crown size and whether we’re resurfacing with a flexible sealant or rebuilding the concrete crown entirely.
How we do it
We clean the crown surface, fill and seal cracks with a commercial crown coat, and for heavily damaged crowns we form and pour a new concrete crown with proper overhang and drip edge.
What Chimney Repair Costs in Murrieta
| Item | Typical range in Murrieta |
|---|---|
| Chimney cap installation | $250 – $550 |
| Chimney flashing repair | $300 – $700 |
| Chimney crown repair | $400 – $1,100 |
On Murrieta tract homes, the biggest price driver is chase geometry. A flue that runs through a stucco chase on the side of the house often needs a custom cap adapter or longer flashing, which adds material and some roof time. We quote a flat price after the inspection and before any work starts, so the number we give you is the number on the invoice.
Do I need a new liner if my prefab flue has rust?
Not always. Light surface rust on the inner flue wall can often be addressed with a ceramic resurfacing product like HeatShield, but if the metal has rusted through or the flue joints have separated, a new liner is the honest answer. We show you the camera footage and let you decide from the evidence.
Can you repair a chase-mounted chimney without removing stucco?
Yes, in most cases. Chase-top work like cap replacement, flashing reseal, and liner installation happens from the roof and inside the flue, not behind the stucco wall. We only cut into the chase when there’s water damage to framing underneath, and we’ll tell you if that’s what the inspection shows.
Brands We Service in Murrieta
The parts we install around Murrieta come from Copperfield and Olympia Chimney, the two distributors chimney professionals actually order from. We use DuraFlex liners for relining work and HeatShield for ceramic flue resurfacing when a full liner isn’t warranted. Common caps, adapters, and flashing get stocked on our trucks, and special-order items usually arrive within a week. See our brands for the full spec detail.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Murrieta, CA
| Service | Typical range in Murrieta |
|---|---|
| Chimney sweep (prefab metal flue) | $180 – $340 |
| Chimney sweep (masonry chimney) | $200 – $380 |
| Dryer vent cleaning | $120 – $250 |
| Chimney cap installation | $250 – $550 |
| Chimney cap replacement | $280 – $600 |
| Chimney flashing repair | $300 – $700 |
| Chimney crown repair | $400 – $1,100 |
| Chimney liner installation (stainless) | $2,200 – $5,500 |
In Murrieta, prefab flues in stucco chases cost less to sweep than full masonry chimneys, but access issues add up: second-story chases, steep roof pitches, and tight chase tops all mean more time on the ladder. You’ll get a flat quote after the inspection, so the price reflects what’s actually on your roof, not a ballpark guess.
Neighborhoods We Serve in Murrieta
We work throughout the 92562, 92563, and 92564 ZIP codes, from the older downtown streets near Washington Avenue to the newer subdivisions off Clinton Keith Road and throughout the master-planned communities east of the 215.
- Central Murrieta / Historic Downtown (92562)
- Murrieta Highlands (92563)
- Clinton Keith Corridor (92563)
- Copper Canyon (92563)
- West Murrieta / Greer Ranch area (92564)
Most Murrieta appointments are booked within three to five business days, with some same-week availability during spring and summer when demand is lighter.
Service Area – Cities Near Murrieta
Ontario Chimney runs crews through the whole Murrieta-Temecula corridor and the surrounding communities. We also cover Murrieta Hot Springs, CA, Wildomar, CA, Temecula, CA, and Sedco Hills, CA. If you’re just outside Murrieta proper, call and we’ll confirm the service area for your address.
Serving Murrieta, CA — Our Local Coverage Area
We’re based in the Murrieta area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Murrieta
Most Murrieta inspections are scheduled within three to five business days. During the late fall and early winter, when fireplace use picks up, the calendar fills faster, so calling a few weeks before you plan to burn is the practical move. We’ll give you a firm day and a two-hour arrival window.
In most Murrieta HOAs, routine maintenance like a sweep or cap replacement doesn’t need approval because it’s on your lot and isn’t visible from the street. If the work changes the exterior look, like a large chase repair or repaint, check your CC&Rs first. We can usually work with whatever the HOA requires and provide photos for their records.
Yes, and the inspection approach differs. Prefab flues get a camera run through the full liner and a visual check of the chase top, flashing, and cap. Masonry chimneys get the same interior camera work plus a structural look at the crown, brick, and mortar joints. You get the full photo report either way.
Ready to get the flue looked at before the next burn season? Call Ontario Chimney at (833) 467-7685 for a free estimate. We’ll inspect what’s in the chase, show you the evidence, and only recommend work the photos support.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Murrieta Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Tara Novak"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Eric Tran"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— David Park