Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Moreno Valley, CA
Chimney repair in Moreno Valley is mostly about factory-built fireboxes, gas log sets, and vent runs that haven’t been looked at in years. Most homes here were built between the 1980s and 2000s, and the prefabricated metal chimney systems they came with are now at the age where caps rust through, flashings separate, and liners show real wear. The heat and Santa Ana dust don’t help. We’re Ontario Chimney, and we’ve served Moreno Valley since 2014. Call (833) 467-7685 when you want an answer about what’s actually going on with your chimney, not a guess.
Why Moreno Valley Homes Are Different
Walk through the tracts in Sunnymead Ranch or Rancho Belago and you’ll see what we mean. These neighborhoods were built fast during the city’s post-1984 incorporation boom, and the fireplaces went in as prefabricated metal boxes with short vent runs through the roof. That’s a completely different animal from the masonry chimneys you’d find in older Inland Empire cities to the west. A factory-built chimney has a metal flue inside a framed chase, and when the cap fails or the storm collar slips, water gets into places homeowners don’t see until the ceiling stains show up.
The local climate does specific things to these systems. Long, hot summers bake roof flashings until the sealant hardens and cracks. Santa Ana wind events that funnel through the Moreno Valley and Badlands corridor drive fine dust and debris straight into caps and spark arrestors, packing the screens shut. Winters are mild enough that fireplaces get light, intermittent use. That means we’re rarely dealing with heavy creosote. We’re dealing with blocked vents, bird nests, rusted caps, and gas log sets that were dropped into wood-burning boxes years ago and never checked. Most Moreno Valley chimney work is service and inspection work, not heavy soot removal.
Homeowners discover the problem on the first cold night of the year, when they finally reach for the gas key or the log lighter and the room fills with smoke. We get those calls every December. The fix is usually straightforward once someone actually looks at the cap, the flue, and the termination.
Styles & brands we work with
Our Main Moreno Valley Services
Most Moreno Valley homeowners call us for one of two things: a sweep and safety check on a fireplace they haven’t used in years, or dryer vent work. Here’s what each involves in this city.
Chimney Sweep in Moreno Valley
In Moreno Valley, a sweep usually means removing wind-driven debris and bird nesting from the cap and flue, checking the damper on a gas-converted firebox, and running a camera through the vent to confirm everything is clear. Since creosote isn’t the primary concern here, the real value is the inspection: confirming the factory-built system is still venting properly and the termination isn’t packed with Badlands dust. Homeowners buying a 1980s or 1990s tract home should get this done before the first fire of the season. Read the full breakdown at Chimney Sweep in Moreno Valley.
Dryer Vent Cleaning in Moreno Valley
Dryer vents clog with lint over years of use, and the long vent runs common in two-story Moreno Valley tract homes just make it worse. A restricted vent means longer dry times, overheated dryer components, and a real fire risk. The NFPA points to dryer vents as a leading cause of house fires, and this is maintenance every homeowner should schedule. We clean the full run from dryer to exterior termination, not just the first few feet. Dryer Vent Cleaning in Moreno Valley covers the details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Moreno Valley
Chimney repair in Moreno Valley starts with the housing stock: factory-built metal fireboxes from the 1980s and 1990s that have spent 30 to 40 years in Riverside County heat with caps rusting through and flashings pulling away from the roof deck. The most common jobs are cap replacement, flashing repair, and liner work on prefabricated systems whose original components are no longer made. When a gas log set was dropped into a wood-burning box years ago, the original damper was often left partly closed, which means the vent has been half-blocked the whole time and birds have had an open route in. Since 2014 we’ve handled everything from cap swaps to full relining, and we’ll show you camera evidence before recommending any work. If you’re just starting to research what’s wrong with your system, read more about the full service at Chimney Repair.
Chimney Cap Replacement
Signs you need it
You hear birds or scratching inside the chimney, you see rust stains running down the chase, or the cap is visibly dented or missing after a Santa Ana event.
What it costs in Moreno Valley
Chimney cap replacement in Moreno Valley typically runs $300 to $900, with the lower end covering standard galvanized caps and the upper end stainless steel caps sized for factory-built systems.
How we do it
We measure the flue termination, pull the old cap, clear any nesting or packed dust from the screen area, and install a properly sized replacement sealed against the chase top.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney chase, damp drywall in the area, or the existing flashing has visible gaps, lifted edges, or cracked sealant.
What it costs in Moreno Valley
Flashing repair in Moreno Valley typically costs $250 to $700 depending on how much of the existing step flashing and counterflashing needs to be cut out and replaced.
How we do it
We remove the failed flashing, inspect the chase top and underlayment, install new step flashing and counterflashing, and seal the transitions against Moreno Valley’s heat, wind, and occasional hard rain.
Chimney Liner Installation
Signs you need it
A camera inspection shows gaps, cracks, or corrosion in the flue, or the original factory-built liner has separated and you can see daylight or feel draft problems.
What it costs in Moreno Valley
Liner installation in Moreno Valley typically runs $2,200 to $8,000, with the range driven by flue length, accessibility, and whether it’s a factory-built system or masonry retrofit.
How we do it
We size the liner to the existing flue, run a DuraFlex stainless steel liner down the chase when the original is failed, connect it properly at the appliance and termination, and verify flow before we leave.
What Chimney Repair Costs in Moreno Valley
| Item | Typical range in Moreno Valley |
|---|---|
| Chimney cap replacement | $300 – $900 |
| Flashing repair | $250 – $700 |
| Chimney liner installation | $2,200 – $8,000 |
Costs in Moreno Valley move with the age of the chase, the roof pitch, and how long the original factory-built components have been exposed to sun and wind. Our price is agreed before we start, and we don’t add charges for the camera inspection.
Do I really need a new liner, or can it wait?
If the camera shows cracks, separation, or corrosion, it’s a combustion gas leak risk and shouldn’t wait. We show you the footage so you decide with evidence, not a sales pitch. Call (833) 467-7685 for a free estimate.
How long does chimney repair take in Moreno Valley?
Most cap, flashing, and crown work is done in one day. A full liner installation takes one to two days depending on access and flue length. We schedule the work and show up when we say we will.
Brands We Service in Moreno Valley
We work with Copperfield and Olympia Chimney for professional-grade caps, dampers, and chase components, and we install DuraFlex liner systems for relining work. For flue restoration, we’re certified applicators for HeatShield ceramic resurfacing, which can bring a damaged flue back to code without a full tear-out. Most components are stocked and available within a week. Read more on our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Moreno Valley, CA
| Service | Typical range in Moreno Valley |
|---|---|
| Chimney sweep | $149 – $275 |
| Dryer vent cleaning | $129 – $250 |
| Chimney cap installation or replacement | $300 – $900 |
| Chimney flashing repair | $250 – $700 |
| Chimney crown repair | $350 – $1,100 |
| Chimney liner installation | $2,200 – $8,000 |
| HeatShield resurfacing | $2,500 – $6,500 |
Prices in Moreno Valley push upward when the roof is steep, the chase is tall, or the original factory-built components are no longer manufactured and need to be adapted. The price we quote before the job is the price you pay, and the camera inspection is included so you can see what we’re charging you for.
Neighborhoods We Serve in Moreno Valley
We work across Moreno Valley’s ZIP codes, including 92551, 92552, 92553, and 92554, and we know the older Sunnymead tracts and the newer east-side developments well. Our typical response window for most neighborhoods is one to three business days.
- Sunnymead Ranch
- Rancho Belago
- Sunnymead
- Moreno Valley East
- Towngate
Service Area – Cities Near Moreno Valley
Ontario Chimney also serves communities around Moreno Valley, including March Air Force Base, CA, Woodcrest, CA, Colton, CA, and Loma Linda, CA. If you’re on the edge of Moreno Valley and not sure which service area you fall into, call us and we’ll confirm.
Serving Moreno Valley, CA — Our Local Coverage Area
We’re based in the Moreno Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Moreno Valley
Most cap, flashing, and routine repair work doesn’t require a permit. Structural changes to the chase or a full liner installation may need city review, and we’ll tell you before work starts if that’s the case for your project.
Yes. Many Moreno Valley HOAs have rules about chimney cap style and exterior components. We’ll match the required cap type and finish when the association specifies one, and we’ll document the work for HOA records if needed.
In peak season we’re typically booking one to three business days out for most neighborhoods. December fills up fastest, so scheduling in October or November is the way to avoid the rush. Call (833) 467-7685 to get on the calendar.
If your chimney has been ignored through a few Moreno Valley summers and Santa Ana seasons, it’s worth a look before you need it. Call Ontario Chimney at (833) 467-7685 for a free estimate. We’ll show you what we find and give you straight answers about what needs fixing and what can wait.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Moreno Valley Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— David Park"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Bethany Padgett"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Sarah Sullivan